Related Manuals for ROJEK PF 300L
Summary of Contents for ROJEK PF 300L
- Page 1 DIMENSION SAW PF 300L PF 300LE PF 350 PF 350E Service instructions manual up dated 4/ 2004 ROJEK Co. PF 300L,°-LE, PF 350, -E...
- Page 2 WOODWORKING MACHINERY, Masarykova 16, 517 50 _astolovice ROJEK the Czech Republic, Europe www.rojek.cz, export@rojek.cz phone ++420 494 339137 up to - 41, fax - 323341, 322701 ROJEK Co. PF 300L,°-LE, PF 350, -E...
-
Page 3: Table Of Contents
Protection of electric parts Machine control 8.6.1 lower panel machine control (PF 300L; PF 350) 8.6.2 upper pan. machine control (PF 300L;LE; PF 350; E) 8.6.2.1 controllers 8.6.2.2 tilting of saw blades a) by pushers b) by reaching a set up value ROJEK Co. - Page 4 16.0 Dealing with packing and machine service life expiry 16.1 Dealing with packing 16.2 Dealing with machine Enclosures : A) Electric connection diagram B) List of electrotechnical components C) List of spare parts ROJEK Co. PF 300L,°-LE, PF 350, -E...
-
Page 5: Introduction
Caution The text and pictures of the manual is a know how of the ROJEK Co. No part of it can be copied and third persons are not allowed to learn it or its part without company´s approval. ROJEK Co. -
Page 6: Working Surroundings
Machine type can be identified at the production shield on machine frame. type of machine : PF 300L - dimension saw PF 300LE-dimension saw with electrically lifted and tilted blades PF 350 - dimension saw PF 350E-dimension saw with electrically lifted... -
Page 7: Technical Data
Dimensions in packing - in folio 3140x1000x1150 3 000 2740x1000x1150 2 600 2400x1000x1150 2 000 - box 3390x1000x1150 CV330 3 200 3250x1120x1111 3 000 2850x1120x1111 2 600 2250x1120x1111 2 000 3500x1120x1111 CV330 3200 Weight brutto Weight netto ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 8: Possible Machine Variants
The most permissible exposition levels can differ accord-ing to country in question, too. This information will serve for machine user to a better astimation of risks. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 9: List Of Used Documents
Basic safety fundamentals, Electrotechnical regulations. Encoding of conveyers and controllers by help of collors and supplementary means. EN 55011 : 1998 Limit and measurement methods of characteristics of electromagnetic interference from industrial, scientific and medical (PLV) appliances. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 10: Safety Instructions
- Do not do up the machine in any way able to endanger its safe operating. - In doubts about correctness of technique – contact a responsible person. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 11: Dress And Personal Safety
- Do not remove nor in any else interfer to safety elements like coverings, limit switches, nor practise its mutual blockage. - Require an assistance for manipulation with parts exceeding your abilities. - At a storm we recommend : Do NOT operate at the machine ! ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 12: Safety Regulations For Maintenance
- Ensure sufficient lighting in working space that will not throw shadows or cause a strobo- scopic effect. Hygienic norms indicate 500 lx for minimal lighting for safe and quality work. - Never lay tools or other subjects onto working tables or coverings. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 13: Transport And Storage
We recommend you to use : D – high-lift E – crane or other lifting appliance F – manual lifting carriage Use a high-lift of sufficient forks length ! ROJEK Co. PF 300L,°-LE, PF 350, -E... - Page 14 The working space extent depends on machine dimensions, intended working operations and dimensions of processed material. Do not forget to let free a big enough space for installment of a sufficiently effective exhausting unit or hoses connecting with the central exhausting system. ROJEK Co. PF 300L,°-LE, PF 350, -E...
- Page 15 1 mm/1metre and screw down machine feet into the bottom (anchor the ma- chine). Attached drawing shows a lay-out of anchoring openings on the machine. ROJEK Co. PF 300L,°-LE, PF 350, -E...
-
Page 16: Saw Blade Guard On The Arm R
- put the arm with conrol panel 21 into the articulation of lower arm 8 and saw blades´arm 7 and fix it with the arresting handle of hinge - so as the articulation stays turnable; adjust the length of the arm with the extensile part and lock it with a screw. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 17: Saw Blade Guard On The Arm Cps
26 can be fixed in the turnable arm by setting screws with locking nuts; the resistance against their turning motion freedom can be suited by tightening force of screws with locking nuts ROJEK Co. PF 300L,°-LE, PF 350, -E... - Page 18 - Use a hose of Ø 40 mm (only for PF 300L; PF 300LE) - Use a hose of Ø 60 mm for the saw blades guard on the arm R.
-
Page 19: Rotating Direction Change
Attention ! Avoid of mistaken changing the yellow-green wire with the phase ! Entirely a specialist qualified in electrotechnics is allowed to make this change and to realize the connecting ! ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 20: Protection Of Electric Parts
EN 60 204-1 and IEC 60 364-4-41. 8.6 Machine control 8.6.1 Lower machine control (PF 300L; PF 350) connecting of the machine to and disconnecting from the mains : The machine gets connected or disco- nnected from the mains by switching on/off the lockable main switch A. -
Page 21: Controllers
(to change decimal order from tenths to ones, tens, …). The pusher, with an arrow upward, shifts the decimal point to the left; the pusher with an arrow downward, shifts the decimal point to the right. ROJEK Co. PF 300L,°-LE, PF 350, -E... - Page 22 3- 8 mm and ver- tically 2 - 3 mm. The fender is mounted above onto the riving knife into an "L" shaped groove. ROJEK Co. PF 300L,°-LE, PF 350, -E...
-
Page 23: By A Hand Wheel
Allen key No. 5 through holes in the table. Release the fixing screw and turn the regulating eccentric piece slowly till the scoring disc is perfectly aligned with the main saw disc. When the adjustment is completed, tighten the screw. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 24: Adjusting Of Lengthwise Rule
The new position of rod must be fixed by two nuts in the edging of table extension in place of attachment of rule to table extension. The rule divergence, set by producer, is c. 0,1÷ 0,2 mm/ 1m. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 25: Adjusting Of Cross-Rule
(at longitudinal sawing) of workpieces narrower than 120 mm. We recommend you to make a special fixture for cutting of the wedges : the minimum fixture length - 300 mm width - 170 mm. ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 26: Working Places
- to overload the machine by sawing of too large workpieces, - to remove shavings from tools surroundings by hand or any thing at a running machine, - to use other saw blades than recommended by the machine producer !! ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 27: Recommended Tools
Saw blades have to be marked with the manufacturer´s name or logo (marking) and with the max. admissible rotation speed. Proper tools for this machine are saw blades : for PF 300L and PF 300LE the main saw blade 300 x 3,2/2,2 x 30 - 96 jags (jags´number can be chosen according to ∅... -
Page 28: Maintenance And Repairs
( hrs.) permanent grease filling exchang to spread wihout tools /out lubricate by oil can of machine run plastic lubricant/ oil LV-2-3 LV-2-3 OL-B5 OL-B5 OL-B5 equivalent ISO-L-XCBEA 3 ISO – LAN 68 ROJEK Co. PF 300L,°-LE, PF 350, -E... - Page 29 Tools are unbalanced - not clear clamping flats of tool(s). Tools are blunt. The machine is installed at an uneven surface. Workpiece strikes the riving knife : Badly chosen or mounted riving knife. ROJEK Co. PF 300L,°-LE, PF 350, -E...
-
Page 30: Accessories
ROJEK Co. PF 300L,°-LE, PF 350, -E... -
Page 31: Spare Parts
15.0 Guarantee Works and operations, not mentioned here, involve a written agreement of the ROJEK Co., Masarykova 16, 5170 50 Castolovice, the Czech Republic, Europe. Every machine and e- quipment is provided with a guarantee certificate. - Page 32 LIST OF ELECTROTECHNICAL PARTS PF 300L, PF 300LE, PF 350, PF 350E 3,0 kW 4,0 kW 5,5 kW marking function type, technical data supplier substitute note pcs. pcs. pcs. ELECTRIC MOTORS CEG M100 – 2 3,0 kW 3x400/230V 6,55/11,3A 50/60Hz...
Need help?
Do you have a question about the PF 300L and is the answer not in the manual?
Questions and answers