Related Manuals for Pneu-Dart 196
Summarization of Contents
Cleaning Cartridge Fired Projectors
Open Bolt and Action
Steps to open the bolt and check for casings before cleaning.
Visual Inspection Checklist
Inspect stock, barrel, and sights for damage or issues.
Cleaning Exterior
Apply oil to the projector exterior and wipe it down.
Cleaning Dart Barrel
Clean the inside of the dart barrel using gun oil and a swab.
Cleaning Power Control
Clean the power control mechanism for various projector models.
Cleaning Your Gas Chamber
Cleaning Gas Chamber (All Models Except 389)
Steps for cleaning the gas chamber on models other than 389.
Cleaning Gas Chamber (Model 389)
Specific steps to clean the gas chamber for Model 389.
Pneu-Dart Model 196 Specifications and Loading
Model 196 Specifications
Details on cartridges, sights, weight, power control, and range.
Loading the Model 196 Projector
Step-by-step instructions for loading darts into the barrel.
Power Control and Calibration
Using the power control knob and calibrating charges for optimal performance.
Pneu-Dart Model 389 Specifications and Loading
Model 389 Specifications
Details on cartridges, sights, weight, power control, and range for Model 389.
Loading the Model 389 Projector
Step-by-step instructions for loading darts into the barrel.
Model 389 Power Control Operation
Explanation of the power control location and adjustment for Model 389.
Pneu-Dart Model 193 Specifications and Loading
Model 193 Specifications
Details on cartridges, sights, weight, power control, and range for Model 193.
Loading the Model 193 Projector
Step-by-step instructions for loading darts into the receiver.
Model 193 Power/Velocity Control
Explains how power/velocity is controlled by power charge and control valve.
How to Adjust Trigger Pull
Disassemble the Projector
Step-by-step guide for disassembling the projector.
Adjusting Trigger Pull
Instructions for loosening the retaining nut and adjusting trigger pull weight.
Reassemble the Projector
Steps for reassembling the projector action, stock, and components.
Pneu-Dart's Guide to General Safety
General Safety Precautions
List of essential safety rules for handling and operating projectors.
Cycling and Performance
Explanation of projector cycling for optimal performance and safety warnings.
Performance and Repair Service
Performance Factors
Factors affecting projector velocity and performance.
Repair Service Information
Recommendations for repair service and warranty information.
Need help?
Do you have a question about the 196 and is the answer not in the manual?
Questions and answers