Run Vgabios If S3 Resume - Biostar U8668-D User Manual

This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), 4 / 5 / 7 / 9 / 10 / 11 / NA
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state when the system has "hung."
The Choices: Delay 4 Sec, Instant-Off (default).

Run VGABIOS if S3 Resume

The Choices: Auto (default), Yes, No.
PWRON After PWR-Fail
This field determines the action the system will automatically take when power is
restored to a system that had lost power previously without any subsequent
manual intervention. There are 3 sources that provide current to the CMOS area
that retains these Power-On instructions; the motherboard battery (3V), the
Power Supply (5VSB), and the Power Supply (3.3V). While AC is not supplying
power, the motherboard uses the motherboard battery (3V). If AC power is
supplied and the Power Supply is not turned on, 5VSB from the Power Supply is
used. When the Power Supply is eventually turned on 3.3V from the Power
Supply will be used.
There are 3 options: "Former-Sts", "On", "Off".
"Off" (default)
"On"
"Former-Sts"
For example: If set to "Former-Sts" and AC power is lost when system is live,
then after AC power is restored, the system will automatically power on. If AC
power is lost when system is not live, system will remain powered off.
IRQ/Event Activity Detect
If you highlight the literal "Press Enter" next to the "IRQ/Event Activity Detect"
label and then press the enter key, it will take you a submenu with the following
options:
VGA
When set to On, any event occurring at a VGA Port will awaken a
Means always set CMOS to the "Off" status when
AC power is lost.
Means always set CMOS to the "On" status when
AC power is lost
Means to maintain the last status of the CMOS
when AC power is lost.
- 23 -
BIOS Setup