Biostar TH55XE Setup Manual page 25

Notices:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
B. Memory Integration Test (M.I.T.)
This function is under "Overclocking Navigator Engine" item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is "HotKey F11"; the condition parameter
should be changed to "Enable" to proceed this test.
Main Advanced
Auto OverClock System
============ Manual OverClock System ============
Current CPU Frequency
Current Memory Frequency
Current UNCORE Frequency
Currnet QPI Frequency
Over Clock Retry Count
Intel(R) SpeedStep(tm) tech
CPU Ratio Setting
CPU Frequency Setting
QPI Frequency
DRAM Frequency
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Control
> Intel PPM Configuration
> BIOSTAR Memory Insight
> G.P.U Phase Control
Integrated Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Main Advanced
Auto OverClock System
============ Manual OverClock System ============
Current CPU Frequency
Current Memory Frequency
Current UNCORE Frequency
Currnet QPI Frequency
Over Clock Retry Count
Intel(R) SpeedStep(tm) tech
CPU Ratio Setting
CPU Frequency Setting
QPI Frequency
DRAM Frequency
> DRAM Timing Configuration
> Clock Gen Configuration
> Voltage Control
> Intel PPM Configuration
> BIOSTAR Memory Insight
> G.P.U Phase Control
Integrated Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from "Enable" to "Disable"
to complete the test.
BIOS SETUP UTILITY
PCIPnP Boot
Chipset
[V6-Tech Engine]
:
:
:
:
[1]
[Enabled]
[ x25.0]
[133]
[Auto]
[Auto]
[HotKey F11]
↓
BIOS SETUP UTILITY
PCIPnP Boot Chipset
[V6-Tech Engine]
:
:
:
:
[1]
[Enabled]
[ x25.0]
[133]
[Auto]
[Auto]
[Enabled]
TH5 5 X E
O.N.E Exit
Options
HotKey F11
Disabled
Enabled
Select Screen
Select Item
Go to Sub Screen
Enter
F1 General Help
F10 Save and Exit
ESC Exit
O.N.E Exit
Options
HotKey F11
Disabled
Enabled
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
Exit
ESC
23