Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acrobat M24
Summarization of Contents
Safety Rules and Precautions
Defining Safety Information
General safety warnings and precautions to prevent potential dangers during operation.
Understanding Safety Warnings
Read manual carefully, use in suitable environment, avoid modifications for safe operation.
Electrical Installation Safety
Machine operates at 380V; phase protection prevents reverse operation.
Hydraulic System Safety
Ensure hydraulic unit is filled with oil and fittings are tight. High pressure warning.
Eye Protection for Ejection Hazards
Wear protective eyewear due to potential metal part ejection during tapping.
Burn Prevention
Avoid touching hot parts due to friction heat generated during tapping.
General Operational Safety
Prohibits body contact, unauthorized operation, intoxication, and unattended use.
Noise Emission Information
Details measurement conditions and results of noise levels from the machine.
Machine Usage and Specifications
Machine's Usage
Explains how the machine facilitates easy, quick, and economical tapping with a hydraulic system and acrobatic arm.
Technical Properties
Lists key specifications like working pressure, power, speed, weight, capacity, and dimensions.
Standard Accessories
Lists standard included accessories such as angle head system and connection bolts.
Optional Accessories
Lists optional items like tap holders with or without safety features and fixed head systems.
Machine Assembly
Base Flange Installation
Instructions for placing and tightening the base flange to the table connection holes.
90-Degree Head Adjustment
Steps to adjust the front head group to a 90-degree vertical position using bolts.
Arm Hardness Adjustment
How to adjust the hardness of the front and rear parallel arms using handles.
Machine Operation Guide
Power Supply Verification
Verifying voltage (380V, 220V) and phase sequence using indicator lights.
Starting and Stopping the Machine
Steps to start the machine using the pacco switch and motor start button.
Spindle Rotation Control
Using buttons on the acrobatic arm to control clockwise or counter-clockwise spindle rotation.
Tap Holder Attachment and Removal
How to attach and detach tap holders using the ring mechanism.
Tapping Process Execution
How to position the tap, press the button for tapping, and retract the tap.
Tap Lubrication Best Practice
Recommends lubricating the tap with grease for better cutting speed and tool life.
Transmission Stage Selection
Explains the two-stage transmission for different tapping ranges (M5-M14 at 600rpm, M16-M24 at 150rpm).
Horizontal Tapping Configuration
Steps to loosen and tighten bolts for horizontal tapping orientation.
Machine Maintenance Procedures
Hydraulic Oil Level and Replacement
Fill oil tank, track level, change oil periodically (2500 hrs), and clean tap holders.
Lubrication Schedule
Apply machine oil and grease to transmission unit fittings based on operation frequency.
Safe Tap Holder System
Torque Adjustment System
Explains the torque-adjusted system within safe tap holders to prevent tap breakage.
Adjusting Torque Values
How to manually adjust torque values by rotating the wire segment for safe tap holders.
Need help?
Do you have a question about the M24 and is the answer not in the manual?
Questions and answers