Dram Timing Configuration; Hyper Transport Configuration; Memory Configuration - Biostar TA790GX 128M Setup Manual

CPU Frequency
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
CPU FID/VID Control
Enter this function for more advanced CPU settings.

DRAM Timing Configuration

Enter this function for more advanced DRAM clock settings.

Hyper Transport Configuration

Enter this function for more advanced Hyper Transport settings.

Memory Configuration

Enter this function for more advanced memory settings.
NOTE
Overclock is an optional process, but not a "must-do" process; it is
not recommended for inexperienced users. Therefore, we will not
be responsible for any hardware damage which may be caused by
overclocking. We also would not guarantee any overclocking
performance.
Automatic Overclock System (A.O.S.)
For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single
step.
Main Advanced
T-Series Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
CPU Over Voltage
Memory Over Voltage
Chipset Over Voltage
HT Over Voltage
CPU Frequency
> CPU FID/VID Control
> DRAM Timing Configuration
> Hyper Transport Configuration
> Memory Configuration
Integrated Memory Test
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M
BIOS SETUP UTILITY
PCIPnP Boot Chipset
[Normal]
[V6-Tech Engine]
Options
Normal
[StartUp]
Automate OverClock
[1.95V]
Manual OverClock
[1.15V]
[1.20V]
[200]
[Disabled]
T-Series Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
31