Biostar T41 HD Setup Manual page 22

Motherboard Manual
Manual Overclock System (M.O.S.)
MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
Main Advanced
T-Series Settings
WARNING:
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
PCIE Frequency Setting
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
> ALL Voltage Configuration
Configure DRAM Timing by SPD
Main Advanced
T-Series Settings
WARNING:
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
Intel(R) SpeedStep(tm) tech
Ratio CMOS Setting
CPU Frequency Setting
PCIE Frequency Setting
FSB(Bsel) To NorthBridge Latch [Auto]
DRAM Frequency
> ALL Voltage Configuration
Configure DRAM Timing by SPD
Intel(R) SpeedStep(tm) Tech
This item allows you to enable SpeedStep technology for better power
saving. SpeedStep is a technology built into some Intel processors that
allows the clock speed of the processor to be dynamically changed by
software.
Ratio CMOS Setting
This item allows you to set the CPU ratio frequency.
CPU Frequency Setting
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
20
BIOS SETUP UTILITY
PCIPnP Boot
Please Clear CMOS if system no display
after overclocking.
[Normal]
[V6-Tech Engine]
Options
Normal
[Enabled]
Automate OverClock
[ x9.0]
Manual OverClock
[200]
[100]
[Auto]
[Enabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
↓
BIOS SETUP UTILITY
PCIPnP Boot
Please Clear CMOS if system no display
after overclocking.
[Manual OverClock]
[V6-Tech Engine]
[Enabled]
[ x9.0]
[200]
[100]
[Auto]
[Enabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Chipset T-Series Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Go to Sub Screen
Enter
F1 General Help
F10 Save and Exit
ESC Exit
Chipset T-Series Exit
Options
Normal
Automate OverClock
Manual OverClock
Select Screen
Select Item
Go to Sub Screen
Enter
F1 General Help
F10 Save and Exit
Exit
ESC