Related Manuals for Banner EDGE
Summarization of Contents
Introducing PresencePLUS P4
Quick Start Overview
Provides an overview of the PresencePLUS P4 and how to easily set up the sensor to inspect a product.
Step 1: Components and Connections
Install the Lens and Filters
Instructions for installing the lens and any optional filters onto the sensor.
Cable Connections
Details on connecting power, NTSC monitor, Ethernet, and the 12-wire cable to the sensor.
Step 3: PC Configuration
Configure IP Address
Guide to setting up the PC's IP address for Ethernet communication with the sensor.
Step 4: Starting the PresencePLUS P4
Power Up and LED Verification
Procedure to power up the hardware and verify the status of power and Ethernet LEDs.
Step 5: Launching Software
Install and Launch Application
Instructions for installing the PresencePLUS software and launching the application to communicate with the sensor.
Step 6: Creating Inspections
Software Setup: Setup Screen
Configuring the sensor, lens, and lighting to acquire a reference image using the Setup screen.
Software Setup: Tools Screen
Adding inspection tools like Location, Vision, Measure, and Test tools to define inspection criteria.
Tool Options
Location Tools
Tools for finding targets and compensating for translation and rotation.
Vision Tools
Tools for counting edges, objects, and analyzing gray scale or BLOBs.
Bar Code Reader
Tool for decoding various bar code types.
Analysis Tools
Tools for measuring between points and evaluating pass/fail criteria.
Step 3: Teach Mode
Teach Mode Configuration
Configuring parameters and teaching good examples for inspection criteria.
Step 4: Run Mode
Viewing Inspection Results
How to select an inspection to run and view the results, including display options.
Step 7: System Setup
Configure Discrete I/O and Communication
Setting up discrete I/O, communication ports, strobe output, and trigger input via System Setup.
Maintenance
Cleaning the Sensor and Lens
Procedures for cleaning the sensor hardware and the lens to ensure optimal performance.
Updating PresencePLUS Software
Instructions for downloading and installing the latest PresencePLUS software and firmware.
Troubleshooting
Common Problems and Solutions
A guide to identifying and resolving common issues encountered with the PresencePLUS P4 sensor.
Specifications
Models and Housing Types
List of available PresencePLUS P4 models for Right-Angle and In-Line housings.
Mechanical and Environmental Specs
Details on dimensions, construction, weight, environmental rating, and operating temperature.
Electrical and Communication Specs
Information on discrete I/O, output configuration, output rating, and communication interfaces.
Specifications Continued
Memory, Power, and Acquisition Specs
Specifications for memory storage, power consumption, and acquisition frame rates/image sizes.
Imager, Pixel Size, and Certifications
Details on imager technology, pixel size, lens mount, and product certifications.
Models vs. Tools
Feature Availability by Model
A table showing which tools are available for each PresencePLUS P4 model.
Need help?
Do you have a question about the EDGE and is the answer not in the manual?
Questions and answers