Related Manuals for HP ProLiant ML115 G1
Summarization of Contents
Operational Overview
Server Management Features
Lists tasks like remote console, serial console access, secure communication, power control, monitoring, and event logs.
LO100 Standard Features
Details features available by default for specific server models via IPMI and web access.
LO100 Optional Features
Explains features requiring the management card or software packages, like SSL, SSH, and Virtual KVM.
Installation of the HP Lights-Out 100c Remote Management Card
Remote Management Card Kit Contents
Lists the components included in the HP ProLiant Lights-Out 100c Remote Management Card Kit.
Preinstallation Procedures
Outlines essential steps like backing up data, shutting down, and powering off the server before installation.
Installing the Remote Management Card
Details the physical steps to install the card onto the system board.
Post-installation Procedures
Covers steps after installation, like reassembling components, connecting cables, and powering on.
Configuration
Configuring Network Access
Explains how to connect the server to the network via Ethernet for remote access.
Configuring User Accounts
Describes the administrator and operator accounts and their respective permissions.
Serial Port Configuration
Guides on enabling and configuring the LO100 serial port via BIOS Setup Utility.
Ethernet Network Settings
Covers selecting management ports, obtaining DHCP, and setting static IP addresses.
Enabling Telnet and HTTP Services
Details how to enable telnet and HTTP services for remote access.
Updating the Firmware
Remotely Updating the Firmware
Explains how to use the load command and TFTP for remote firmware updates.
Using LO100
Secure Communication (SSL/SSH)
Explains Secure Sockets Layer (SSL) and Secure Shell (SSH) for secure remote management.
SSH Client Utilities
Guides on using PuTTY and OpenSSH for remote connections.
Command Line Protocol (CLP)
Introduces the Command Line Protocol (CLP) for server management via telnet, SSH, or serial.
CLP Syntax and Commands
Details the general syntax, verbs, targets, and options for CLP commands.
Need help?
Do you have a question about the ProLiant ML115 G1 and is the answer not in the manual?
Questions and answers