Download Print this page
American Audio RACK COLOR LED User Instructions
American Audio RACK COLOR LED User Instructions

American Audio RACK COLOR LED User Instructions

Advertisement

Quick Links

Descriptions:
Congratulations with your purchase of this product.
Read this manual carefully before using our American Audio Rack Color LED. The
with rainbow effect, providing 24 in color RGB LEDs, designed for the Working DJ. All parameters and work modes can be set
up by LED remote operation.
Delivery Packet:
Check for transport damage.
You should be in possession of the following items:
1
Rack Color LED
1 Manual
1 LED Remote Control(Infrared Remote Control)
Should you discover transport damage after unpacking the equipment, inform the hauler immediately.
Never connect a damaged device. You may also contact your supplier.
Main Features:
- Easy-to-use 19'' LED bar used to light up your DJ rack(24 LEDs)
-LED Advantages: NO heat output, low power draw, long life LED operation
-3-pin XLR IN/OUT
-Master/Slave operation
-RC-1 infrared remote control included
-Control: color range, brightness & rainbow effect with pattern, speed and fadetime control
-LED Colors: Red, Cyan, Green, Magenta, Blue, Yellow, White & Amber
-Power Supply:DC12V, 500mA min included
-Dimensions(LxWxH): 3''x19x2''/76x482x50mm- 1 rack space
Weight: 1.5lbs/ 0.8kg
Notice Information:
*Please Note:
Improvements and specifications in the design of the unit and the manual are subject to change without any prior written notice.
*Special Note:
For reducing signal errors and avoiding signal transmission problems and interference, it is always advisable to connect 120 ohm
impedance DMX signal cable and DMX terminator for signal connection.
Customer Support:
American Audio provides a toll free customer support line, to provide set up help and to answer any question should you encounter
problems during you set up or initial operation. You may also visit us on the web at www.AmericanAudio.us for any comments or
suggestions.
Service Hours are Monday through Friday 9:00 a.m. To 5:30 p.m. Pacific Standard Time.
American Audio - www.AmericanAudio.us
LOS ANDELES,CA.90058
Rack Color LED
User Instructions
Voice:(800) 322-6337
Fax:(323) 582-2610
E-mail:support@AmericanAudio.us
-Page 1-
Rack Color LED
is a 19''/1U RGB LED Bar
P/N:24-004-2108-00Rev1.1

Advertisement

loading

Summary of Contents for American Audio RACK COLOR LED

  • Page 1 Customer Support: American Audio provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during you set up or initial operation. You may also visit us on the web at www.AmericanAudio.us for any comments or suggestions.
  • Page 2 Operating Instructions: All work modes and parameters can be set up by a combination with Infrared remote control operation. 1. Before operation, make sure the batteries(3V, CR2025) have been installed properly. 2. Operation Instructions There are 8 dedicated color brightness pushbuttons(marked Red, Green, Blue, White, Cyan, Magenta, Yellow, Amber).
  • Page 3 NOTE: 1.The built-in patterns consists of 1~10 patterns plus a sequence of 10 patterns. 2.There are optional 10 different levels for chase speed; Speed Time 32.5S 130S 260S 512S 3.And fade time is available from 0% through 100%, total 11levels, 10% per level. 4.Effective distance from your unit to Remote Control shall be limited within the range of 10m.