POCKET RECORD WaRRaNTy REGISTRaTION The Pocket Record carries a one year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
SD card. You may select any blank track number you prefer to record on before you record, or the Pocket Record will select a blank track for you automatically. Whenever a track is recorded, the track number will be fixed and you will not able to change it even if the previous track is deleted or added.
3. Please use the DC power adaptor of USB type in correct 5V DC specification. 4. Please do not take apart or repair the Pocket Record by yourself. Please bring the Pocket Record back to your retailer or to a local service vendor for repair and assistance.
POCKET RECORD CONTROlS aND FEaTURES INPUTS, CONTROLS, & FUNCTIONS 1. BUILT-IN mICROPhONe “L“ChaNNeL - A omni condenser microphone is installed into the de- vice as the “L” (left) channel. 2. BUILT-IN mICROPhONe “R” ChaNNeL - A omni condenser microphone is installed into the device as the “R”...
POCKET RECORD CONTROlS aND FEaTURES 12. BUILT-IN mICROPhONe SeNSITIvITy SeLeCTOR - Select the sensitivity level of the built-in microphones, high (h) or Low (L), or switch off the built-in microphone (OFF). 13. key hOLD SwITCh ON / OFF - Put the switch to the “ON” position to put the key control on hold (stop running), or put the switch in the “OFF”...
POCKET RECORD BaTTERy INSTall/POWERING ON/OFF 1. Open the battery cover and install two new AA batteries into the Pocket Record. 2. The Pocket Record works on both primary batteries (and Alkaline batteries) and Ni-Mh recharge- able batteries. To use primary batteries, put the battery selector switch to the “1.5V” position; to use Ni-Mh rechargeable batteries, select the “1.2V”...
2. The device allows you to record into the internal flash memory or into an installed SD card mem- ory (2). The Pocket Record will change to the SD card memory automatically when an SD card is installed. To change between the internal flash memory “F” (2) and the SD card “C”, press the MODE/STOP button and then press the RECORD button.
-35dB (at 1KHz). You may also adjust the AUDIO IN VOLUME CONTROL (7 & 8) to make slight vol- ume adjustment. 2. There are two Audio-in jacks for the Pocket Record a left and a right (9 & 10). They allow you to plug two extension microphones into the jacks for recording. If you use an extension microphone you must put the AUDIO IN SELECTOR switch (11) in the microphone “M”...
MDR-2 2. To get the best recording result, we suggest that you put the Pocket Record at a distance of around 60cm from the sound source, at about table height. 3. Adjust the input volume to a proper level. Do not set the volume to the highest level when record- ing, otherwise, the recording sound quality will be distorted.
1. FOLDeR 1 or FOLDeR 2: FOLDER 1 stores and plays the files/tracks you have recorded with the Pocket Record. FOLDER 2 stores and plays the files downloaded/transferred from a computer. To change between the two folders, press the MODE/STOP button, and then the MENU button to inter- change between FOLDER 1 and FOLDER 2 (1).
(to backup your data), or download/transfer music from your computer to the Pocket Record. Connect one end of the USB cord to the port of the Pocket Record and the other end of cord to USB port on your computer.