Using The Bank Buttons; Changing Time Display - American Audio CDI-300 MP3 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)
13. BANK BUTTONS (9):
These buttons are used to store your samples and cue points. Only a sample
or a cue point can be stored into each of these three banks. When a sample is
stored in to these banks you may use the sample starting point as a cue point.
The BANK BUTTONS instantly recall and play any of your stored samples or
cue points without interrupting music playback. When in sample mode, (see
"Using the Built-In Sampler" on page 19) and during playback, pressing any of
the BANK BUTTONS that stores a sample, will immediately begin to play that
sample without interruption of music. If the unit is in sample mode and the drive
is not in playback mode, pressing any of the BANK BUTTONS that stores a
sample, will immediately begin to play that sample.
TIME BAR INDICATOR - Details the time defined in the TIME METER (42) as a visual bar icon. As with the
TIME METER (42) this bar is also dependent on the selected time function [REMAIN (44) OR ELAPSED]. This
bar will begin to flash when a track is ending regardless
bar as a visual reminder that a track is ending.
©
14. CHANGING THE TIME DISPLAY (42)/TIME BAR (41):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (6), will change the
time display information (41 & 42) in the LCD (26). The following is a break down
of the time settings and their definitions:
Figure 28
American Audio - www.AmericanAudio.us - CDI-300 Mp3™ Instruction Manual Page 21
®
Figure 27
of which time func
t
i
on you are in. Use the flashing