Table of Contents
Advertisement
BUILT-IN EFFECTS
Figure 49
PARAMETERS:
All the effects have adjustable parameters. The parameters change the
way the effects will react. To enter the parameter menus for any of the
effects, press and turn either of the two PARAMETER KNOBS (25 OR 29).
When the parameter mode is selected the time display in the LCD (30) will
change to indicate the parameter your are adjusting. All effects except
the pan effect have two adjustable parameters. PARAMETER TIME (29)
and PARAMETER RATIO (25). Use these knobs to customize the effects
to your liking.
©
TRANS/PAN EFFECT: The Trans effect simulates a real-time mixer trans-
former effect. When the "Transformer" effect is activated the TRANS LED
will flash green, when the "Pan" effect is selected the PAN LED will flash
blue. The Pan effect allows you to pan the output from the left channel to
the right channel.
TRANS EFFECT: The Trans effect has two adjustable parameters,
Parameter Time and Parameter Ratio. The PT will adjust the Trans Speed
and The PR will adjust the Trans Audio Length. The lower the PT value the
faster the Trans effect (PT 0500 = 1/2 second, PT 1000 = 1 second).
PAN EFFECT: The Pan effect uses the PT value to pan left to Right. PT
0500 is the default setting which is center pan. The Pan Value ranges from
10ms to ten seconds.
HOLD BUTTON: Use the HOLD BUTTON (19) to lock your custom-
ized parameters. If the hold button is not activated any changes to your
parameters will be momentary. To activate the hold function press the
HOLD BUTTON (19) as in figure 50. When the hold function becomes
activated, the hold button will begin to glow red.
Figure 51
American Audio
- www.AmericanAudio.us - CDI-500 Mp3™ Instruction Manual Page 31
®
Figure 50
Hide quick links:
Advertisement
Table of Contents
