Table of Contents
Advertisement
Section 3 - Radio Setup Menu (RADIO SETUP)
Hold down CALL/MENU then scroll down and select RADIO SETUP.
Press ENT or push the rotary knob to show the RADIO SETUP menu options.
Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.
3-1 The Radio Setup Menu Options (RADIO SETUP)
UIC
CH NAME
RING VOLUME
KEY BEEP
INT SPEAKER
WATCH MODE
WX ALERT
COM PORT
BARO SENSOR
TEMPERATURE
HAPPY FISH
3-2 Select the Channel Bank (UIC)
There is a choice of three channel banks; USA, International, or Canadian (see Appendix C for details).
RADIO SETUP
> UIC
CH NAME
RING VOLUME
22
Select the channel bank (US only) .
See Section 3-2 .
Edit or delete channel names.
See Section 3-3 .
Set the volume level of the incoming call notification beeps.
See section 3-4 .
Set the volume level of the beeps.
See section 3-4 .
Turn the radio's internal speakers ON or OFF.
See section 3-5 .
Selects Dual or Tri watch scanning (US only) .
See section 3-6 .
Selects WX Alert scanning mode ON (on) or OFF (off ) (US only) .
See section 3-7 .
Select NMEA protocol for communications between the VHF radio and any
other instruments. (721 / 725 only) See section 3-8 .
Select the barometric units, calibrate the sensor, turn the display ON or OFF.
See Section 3-9 .
Select the temperature units, calibrate the sensor.
See Section 3-10 .
Select the HAPPY FISH alarm to be ON or OFF.
See Section 3-11 .
(US only)
UIC
> USA
INT'L
CANADA
Northstar Explorer VHF Series: 721/725 Operation and Installation Manual
1.
Select RADIO SETUP.
2.
The cursor is at UIC. Press ENT or push the rotary
knob to display the list of channel banks.
3.
Select the channel bank to use then press ENT
or push the rotary knob to confirm the setting
and return to the menu.
Hide quick links:
Advertisement
Table of Contents
