Section 3 - The Radio Setup Menu (Radio Setup); The Radio Setup Menu Options (Radio Setup); Select The Channel Bank (Uic); Change Channel Names (Ch Name) - NorthStar VHF Marine Radio Explorer 721EU Operation And Installation Manual

Section 3 - Radio Setup Menu (RADIO SETUP)
Hold down CALL/MENU then scroll down and select RADIO SETUP. Press ENT or push the rotary knob to show
the RADIO SETUP menu options.
Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

3-1 The Radio Setup Menu Options (RADIO SETUP)

UIC (721US only)
CH NAME
RING VOLUME
KEY BEEP
INT SPEAKER
WATCH MODE
WX ALERT (721US only)
COM PORT
BARO SENSOR
TEMPERATURE
HAPPY FISH

3-2 Select the Channel Bank (UIC)

721US only.
There is a choice of three channel banks; USA, International, or Canadian (see Appendix C for details).
RADIO SETUP
> UIC
CH NAME
RING VOLUME
Select the channel bank (721US only)
See Section 3-2.
Edit or delete channel names.
See Section 3-3.
Set the volume level of the incoming call notifi cation beeps.
See Section 3-4.
Set the volume level of the beeps.
See Section 3-4.
Turn the radio's internal speakers ON or OFF.
See Section 3-5.
Select Dual or Tri watch scanning.
See Section 3-6.
Turn the WX Alert scanning mode ON or OFF. (721US only)
See Section 3-7.
Select NMEA or NAVBUS protocol for communications between the radio and any
other instruments.
See Section 3-8.
Select the barometric units, calibrate the sensor, turn the display ON or OFF.
See Section 3-9.
Select the temperature units, calibrate the sensor.
See Section 3-10.
Select the HAPPY FISH alarm to be ON or OFF.
See Section 3-11.
UIC
> USA
INT'L
CANADA
Northstar Explorer VHF Series: 721US, 721EU Operation and Installation Manual
1. Select RADIO SETUP.
2. The cursor is at UIC. Press ENT or push the rotary
knob to display the list of channel banks.
3. Select the channel bank to use then press ENT
or push the rotary knob to confi rm the setting
and return to the menu.
21