Systems And Circuits; Fire Extinguisher System; Electrical System - NorthStar 230 CDS Manual

Table of Contents

3. SYSTEMS AND CIRCUITS

Please check the location of fire extinguisher holder.Make sure that you fix

an approved fire extinguisher on the holder before using your boat.

Your boat also has fixed fire-extinguisher system located in the

engineroom.Please read the instruction manual of fixed fire extinguisher

system.

Before discharging, shut down engines and blowers.

Please check the Skipper's Manual for general information.

NORTHSTAR MANUAL

A main cut off switch is provided inside the aft storage by the battery box.

This cut-off switch disconnects the battery from the electrical system of

your boat.

Two switch panels with fuses are provided on the console for electrical

equipment. You can control the navigation lights, pole light, livewell pump

(if fitted), shower pump, cabin lighting and the bilge pumps. Since your

boat is equipped with two automatic bilge pumps, separate 3 position

switches on the console are provided for their operation. When your boat

remains in the water, leave bilge pump switches at Auto position for

automatic operation.

Above is how your electrical switch panels look like. Fuses are found in the

fuse holders below the switches. To replace, open the fuse holder with a

screwdriver and close after installing a new fuse. Periodically check your

fuses and carry spares.

Table of Contents