Location Of Seacocks And Through-Hull Fittings; Systems And Circuits; Electrical System - NorthStar 220 CC Manual

2.5. LOCATION OF SEACOCKS AND THROUGH-HULL FITTINGS

(*) Not available in all models
NORTHSTAR MANUAL

3. SYSTEMS AND CIRCUITS

3.1. ELECTRICAL SYSTEM

Please find location of electrical equipment on your boat on page 15.
A main cut off is switch provided inside the aft storage by the battery box.
This cut-off switch disconnects the battery from the electrical system of
your boat.
A switch panel with fuses are provided on the console for electrical
equipment. You can control the navigation lights, pole light, livewell pump,
shower pump and the bilge pumps. Since your boat is equipped with two
automatic bilge pumps, separate 3 position switches on the console are
provided for their operation. When your boat remains in the water, leave
bilge pump switches at Auto position for automatic operation.
Above is how your electrical switch panel looks like. Fuses are found in the
fuse holders below the switches. To replace, open the fuse holder with a
screw driver and close after installing a new fuse. Periodically check your
fuses and carry spares.
If a fuse consistently blows, please have your electrical circuitry checked
by a professional.
8