ACRONIS TRUE IMAGE SERVER 8.0-LINUX User Manual page 30

Console mode
nfs://hostname/share name:/remote filename
For example:
trueimagecmd --list --filename:nfs://dhcp6-
223.acronis.com/sdb3/nfs_root:/mike/md1.tib
shows contents
223.acronis.com node in /sdb3/nfs_root directory exported by NFS.
To get Samba network access, specify the image file name as follows:
smb://hostname/share name/remote filename
Hostname may be specified with username and password as:
username:password@hostname
For example:
trueimagecmd --list --filename:smb://dhcp6-
223.acronis.com/sdb3/mike/md1.tib
shows contents
223.acronis.com node in /sdb3 directory exported by Samba.
--harddisk:disk1,disk2, etc
With --create, specifies the hard disks to include into the image file. With --restore,
specifies the hard disks to restore from the image file. The list of available hard disks is
provided by the --list command. An image may contain data of more than one hard disk.
In that case, separate disk numbers by commas, e.g.:
--harddisk:1,3
--target_harddisk:disk
Specifies the target disk to which the image will be restored.
--partition:disk1-part1,disk2-part2, etc
With --create, specifies the partitions to include into the image file. With --restore,
specifies the partitions to restore from the image file. The list of available partitions is
provided by the --list command. Partition numbers are specified as <disk number>-
<partition number>, e.g.:
--partition:1-1,1-2,3-1
--target_partition:disk-partition
Specifies the target partition to which the image will be restored.
--compression:level
Sets image compression level. The valid range - from 0 to 9, the default value is 3.
--progress:on|off
Shows/hides the operation progress bar, hidden by default.
30
of /mike/md1.tib archive.
of /mike/md1.tib archive.
/mike/md1.tib is located
/mike/md1.tib is located
Copyright © Acronis, Inc., 2000-2005
on dhcp6-
on dhcp6-