Media Components; Error Handling - ACRONIS TRUE IMAGE ECHO - FOR LINUX User Manual

If you do not have enough space to store the backup on your hard disk, the program will
warn you and wait for your decision as to how you plan to fix the problem. You can try to
free some additional space and continue or click Back and select another disk.
When backing up to a diskette, CD-R/RW or DVD+R/RW:
will ask you to insert a new disk when the previous one is full.
Alternatively, you can select Fixed size and enter the desired file size or select it from
the drop-down list. The backup will then be split into multiple files of the specified size.
That comes in handy when backing up to a hard disk with a view to burning the archive
to CD-R/RW or DVD+R/RW later on.
Creating a backup directly on CD-R/RW or DVD+R/RW might take considerably more
time than it would on a hard disk.

5.3.9 Media components

The preset is disabled.
When backing up to removable media, you can make this media bootable by writing to it
additional components. Thus, you will not need a separate rescue disk.
Choose the basic components, necessary for boot and restoring data, on the General
tab.
The Acronis One-Click Restore is a minimal addition to the image archive, stored on
removable media, allowing one-click disk recovery from this archive. This means that at
boot from the media and clicking "restore" all the data contained in the image will be
silently restored.
Because one-click approach does not imply user selections, like selecting partitions to
restore, Acronis One-Click Restore always restores the entire disk. Therefore, if your disk
consists of several partitions and you are planning to use Acronis One-Click Restore, all
the partitions must be included in the image. Any partitions which are missing from the
image will be lost.
If you want more functionality during restoration, write a standalone version of Acronis
True Image Echo Server to the rescue disk. Then you will be able to configure the restore
task using Restore Data Wizard.
Under Advanced tab you can select full, safe or both Acronis True Image Echo Server
loader version. The safe version does not have USB, PC card or SCSI drivers and is useful
only in case the full version does not load.

5.3.10 Error handling

1. Ignore bad sectors
The preset is disabled.
With the default setting, the program will generate a message each time it comes across
a bad sector and ask for user decision whether to continue or stop the backup procedure.
In order to back up the valid information on a rapidly dying disk, enable ignoring bad
sectors. The rest of the data will silently backed up and you will be able to mount the
image and extract valid files to another disk.
2. Do not show messages and dialogs while processing (silent mode)
The preset is disabled.
Acronis True Image Echo Server