Table of Contents
Advertisement
Quick Links
IN GROUND POOL/SPA HEAT PUMP HEATERS
INSTALLATION & OPERATIONS MANUAL
FOR YOUR SAFETY
This Heat Pump is listed by ETL as complying
with the latest edition of the UL Standard for
Safety for Heating and Cooling Equipment",
UL1995 and CSA C22.2 No. 236.
All Heat Pumps must be installed in accordance
with all applicable National and Local codes. In
the absence of local codes, refer to the latest
edition of the National Electric Code (NEC) in the
United States and the Canadian Electric Code
(CEC) in Canada.
FOR YOUR SAFETY:
This product must be installed and serviced by
authorized personnel, qualified in pool/spa heater
installation. Improper installation and/or
operation can cause death, serious injury
and/or property damage.
SAVE THESE
INSTRUCTIONS
CONTENTS
USE ONLY GENUINE REPLACEMENT PARTS
51300003301G
Pg.
2
11
11
13
16
17
18
23
23
23
24
25
26
29
1
Advertisement
Table of Contents
Related Manuals for HeatPRO 100
Summarization of Contents
GETTING STARTED
WHAT TO EXPECT WHEN OPERATING YOUR POOL HEATER
Outlines the process for pool heater operation, focusing on water quality.
Wiring Connection Diagram
ERROR CODES
Lists and explains error codes for the heat pump system.
SAFETY INFORMATION
CONFORMANCE WITH CODES
Details compliance with installation codes and standards.
DEFINITIONS
Pressure measurement units
Explains units used for pressure measurements in the manual.
INSTALLATION
LOCATING THE HEATER
Provides guidance on optimal placement for efficient operation and condensation management.
OUTDOOR INSTALLATION AND SERVICE CLEARANCES
Specifies required clearances for outdoor installation, service access, and air flow.
HEAT PUMP PROTECTION FEATURES
CONTROL SETUP HEAT ONLY MODELS
Describes user interface and settings for heat-only functionality.
CONTROL SETUP HEAT/COOL MODELS
Describes user interface and settings for heating and cooling functionalities.
Heat Only User Interface
FUNCTION SELECTION
Guides on selecting modes like Pool, Spa, or temperature units.
Operation and Control Settings
TEMPERATURE ADJUSTMENT
Instructions for adjusting pre-set temperature settings for SPA and POOL modes.
NORMAL OPERATION FOR POOL & SPA MODES
Details the normal heating cycle initiation and operation based on set points.
Heat/Cool User Interface
FUNCTION SELECTION
Guides on selecting modes like Heat, Cool, Auto, or temperature units.
Heat/Cool Operation and Control Settings
TEMPERATURE ADJUSTMENT
Instructions for adjusting pre-set temperature settings for Heating, Cooling, and Auto modes.
NORMAL OPERATION FOR HEAT, COOL & AUTO MODES
Details normal operation for Heat, Cool, and Auto modes based on set points.
WATER TESTING
WATER PRESSURE SWITCH TEST / ADJUSTMENT PROCEDURE
Procedure for testing and adjusting the water pressure switch for proper operation.
MAINTENANCE & SERVICE
Overview of recommended periodic maintenance tasks and service procedures.
COMPONENT SERVICE
CONTROL SYSTEM
Information on the display keypad, control board, and terminal board components.
THERMISTOR
Procedure for the removal and replacement of the thermistor component.
TROUBLESHOOTING
ERROR and OPERATION CODES
Index of display codes, their possible causes, and informational notes.
TROUBLESHOOTING LOOKUP CHART
A chart to help diagnose and resolve common operational problems and issues.
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers