Managing A Single Remote Computer; Connecting To A Remote Computer - ACRONIS TRUE IMAGE - FOR MICROSOFT WINDOWS SMALL BUSINESS SERVER User Manual

7. Once the installation starts, the program displays the operation progress and the name
of the computer on which the component is being installed.
To update an Acronis component on a remote computer, perform the same procedure.

4.3 Managing a single remote computer

To perform any operation on a single remote computer, you must first connect to it.

4.3.1 Connecting to a remote computer

To establish a remote connection:
1. Click Connect to a remote computer in the center of Acronis True Image
Management Console main window or on the toolbar, or select New connection from
the sidebar or the Connect menu.
2. Enter the computer network name, IP address or select it using Browse... button.
Browse... will open a list, including all computers controllable with Acronis True Image
Management Console.
3. Enter administrator or backup operator username and password.
When connecting to a backup server inside a domain, mind whether your domain or
local account is registered on the backup server. If you entered Windows on a network
computer using your domain account while your local account is registered, enter the
local user name along with the backup server name (for example, Server1\username).
Otherwise the name will be identified as a domain one.
After a connection is established, you will see a list of operations available in the central
part of Acronis True Image Management Console main window:
Main window of Acronis True Image Management Console when connected to a remote
42
computer
Copyright © Acronis, Inc., 2000-2009