Bandwidth Throttling; Additional Settings - ACRONIS RECOVERY - FOR MICROSOFT EXCHANGE Manual

5.4.6 Bandwidth Throttling

You can limit the bandwidth used by the backup process so that network resources will
be available for other processes.
To set the desired data transfer speed, check the Enable bandwidth throttling
parameter. Select a maximum bandwidth value from the drop-down list or enter a
value manually.

5.4.7 Additional Settings

1. Validate backup once it has been created
When enabled, the program will verify the integrity of the archive immediately after it
is created.
To validate the archive data integrity you must have all of the backups in the
series (full and incremental backups) available in the same location. If any of
the successive backups are missing, validation will not be possible.
2. Backup metadata
This parameter is selected by default, which allows backing up metadata.
3. Overwrite data on the tape
Select this parameter if you use tapes as a backup location and want to choose an
overwrite mode. See 5.1.9 for detailed information.
4. Fast incremental backup
Select this parameter to create only brick-level (mailbox level) backup, which provides
quicker restoring of individual e-mails and mailboxes. The backup process will run
faster because Acronis Recovery for MS Exchange will not detect items deleted since a
full backup was created, but will back up only new or changed items.
5. Do not truncate logs
This parameter is available only while backing up information stores/storage groups
and is disabled by default.
59