Upgrading From Previous Product Versions - ACRONIS DISK DIRECTOR 11 ADVANCED SERVER Quick Start Manual

3.10.2 Upgrading from previous product versions

Preparation
If the languages of the two products are different, uninstall Acronis Disk Director 10 before installing
Acronis Disk Director 11. Otherwise, the installation will fail.
The procedures below assume that you have an upgrade license key, but you can also use these
procedures if you have a full license key.
Upgrading Acronis Disk Director 10 Server to Acronis Disk Director 11 Advanced
Server
Before proceeding with the upgrade, make sure that:
 You have the license key for Acronis Disk Director 10 Server.

You have a full or upgrade license key for Acronis Disk Director 11 Advanced Server.
The upgrade procedure
1. Log on as an administrator to the machine where Acronis Disk Director 10 Server is installed.
2. Start the Acronis Disk Director 11 Advanced setup program.
3. Click Install Acronis Disk Director.
4. For the upgrade license key: Specify the upgrade license key and the license key for Acronis Disk
Director 10 Server.
For the full license key: specify only the key for Acronis Disk Director 11 Advanced Server.
5. Follow the on-screen instructions as described in Installation procedure (p. 7).
Result: Acronis Disk Director 10 Suite is replaced with Acronis Disk Director 11 Advanced Server.
10 Copyright © Acronis, Inc., 2000-2010