Backup Options - ACRONIS BACKUP AND RECOVERY 10 ADVANCED WORKSTATION - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual

The "0" value means the last backup in the archive, for example:
/include_pits:0
If not specified the whole archive is selected.
net_user:[username]
Specify a user name for network drive access.
net_password:[password]
Specify a password for network drive access.
ftp_user:[username]
Specify a user name for access to an FTP server.
ftp_password:[password]
Specify a password for access to an FTP server.
1.1.2.2

Backup options

incremental
Set the backup type to incremental.
If not specified or there is no basic full backup, a full backup will be created.
differential
Set the backup type to differential.
If not specified or there is no basic full backup, a full backup will be created.
compression:[0...9]
Specify the data compression level.
It ranges from 0 to 9 and is set to 3 by default.
crypt:[AES128|AES192|AES256]
Specifies the key size for the AES algorithm encryption of the password-protected archive. The option
is used together with the /password (p. 9) option. For example:
/password:QWerTY123 /crypt:AES256
The randomly generated encryption key is then encrypted with AES-256 using a SHA-256 hash of the
password as a key. The password itself is not stored anywhere on the disk or in the backup file; the
password hash is used for verification purposes. With this two-level security, the backup data is
protected from any unauthorized access, but recovering a lost password is not possible.
10 Copyright © Acronis, Inc., 2000-2010