Advertisement

Best Artisan & Better Than Most
Quick Start
(S6520 / S8520 / S9920)
Please read all instructions before use for the best performance
of this product. Save these instructions for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S9920 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bestisan S9920

  • Page 1 Best Artisan & Better Than Most Quick Start (S6520 / S8520 / S9920) Please read all instructions before use for the best performance of this product. Save these instructions for future reference.
  • Page 2: Box Contents

    Box Contents MUTE VOL+ VOL- MOVIE MUSIC DIALOG TREB+ RESET BASS+ TREB- BASS- Sound Bar Remote Control Quick Start Mount Screws and Wall mount template Wall Mount Brackets Stereo RCA to Digital Optical cable Power Adapter 3.5mm audio cable LED Indicators and Button Introduction Standby Bluetooth Optical...
  • Page 3 Right side of Sound Bar Turns the power on or select the source input mode (Bluetooth -> Optical -> RCA -> AUX , press and hold to power off. -> USB) Adjusts the volume, when adjusting, the LED indicator flashes until the volume to the MAX or MIN.
  • Page 4: Connection Diagram

    Connection Diagram Bluetooth signal up to 30 feet Bluetooth Device OPTICAL BD / DVD / Set-top Power box / Game console adapter...
  • Page 5: Connecting With A Tv

    Connecting with a TV Bottom Panel of the Sound Bar OPTICAL L - RCA - R RCA to 3.5mm audio cable (supplied) Optical digital cable (supplied) Method 1. Connecting using a RCA to 3.5mm audio cable. Select RCA mode. Method 2. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”.
  • Page 6: Connecting A Bluetooth Device

    Sound Bar, the LED indicator blinks blue. b. Turn on Bluetooth on the Bluetooth device. c. Select “S6520 or S8520 or S9920” and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly.
  • Page 7: Installing The Wall Mount

    Installing the Wall Mount 1. Place the wall mount guide against the wall surface. Push a pencil tip to mark the four bracket holes for supporting screws, and then remove the wall mount guide. The template must be level. 3 inches or more Leave 3 inches at least between the template and TV.
  • Page 8: Troubleshooting

    Troubleshooting If you have a problem with your Sound Bar, there is quick simple solution, first make sure: The cables between Sound Bar and input devices are securely connected, the power adapter is also connected to a working power source. The adapter LED indicator is lighting, and the LED indicator is lighting in the middle of Sound bar.
  • Page 9: Fcc Statement

    Check if the Sound Bar is connected with the third Bluetooth device. Be sure that there are no solid obstructions between the Sound Bar and source device.(within 30 feet) Reboot the Bluetooth and connect again. Hear echo when watching TV Setting your TV audio to External Speaker.
  • Page 10 Best Artisan & Better Than Most Thanks for reading! Best Artisan Corp. 801 DUPONT AVE SUITE F & G, ONTARIO, CA, 91761. service@bestisan.com...

Table of Contents