Replication Jumbo Frames Blocked
Description
Cause
Workaround
Replication Destination Does Not Have Enough Space
Description
Cause
Workaround
Replication Source Is Busy
Description
Cause
Workaround
Replication Source Is Down
Description
Cause
Workaround
84
Replication between the NAS source volume and NAS
destination volume fails because the jumbo frames are
blocked over the network.
Replication task fails because jumbo frames are blocked
over the network.
The administrator must verify that the network
configuration between the source cluster and the
destination cluster has enabled transferring jumbo frames
across the switches or routers.
Replication between NAS source volume and NAS
destination volume fails because there is not enough
space in the destination NAS volume.
Replication task fails because there is not enough space
in the destination NAS volume.
Increase the space of the destination NAS volume.
Replication between the NAS source volume and the NAS
destination volume fails because the file system of the
source NAS volume is busy replicating other NAS
volumes.
Replication task fails because the file system of the
source NAS volume is busy replicating other NAS
volumes.
The replication continues automatically when the file
system releases part of the resources. The administrators
must verify that the replication automatically continues
after a period of time (an hour).
Replication between the NAS source volume and the NAS
destination volume fails because the file system of source
NAS volume is down.
The file system of the source NAS volume is down.
Administrators must check if the NAS cluster solution is
down in the source system, by checking the monitoring
section of the NAS Manager. If the NAS cluster solution is
down, the administrators must start the file system on the
source cluster. The replication continues automatically
when the file system starts.