Network-Configuration - Dell PowerVault NX3600 Command Line Interface Manual

This command rebalances all the client connections for the specified protocol.
Syntax
system networking client-connections mass-rebalance protocol
Where the argument is :
protocol
list
Description
This command displays the client/router IP address, the access vie virtual IP address, and so on.
Syntax
system networking client-connections list

network-configuration

The commands available under network-configuration are:
• view
• set
• list
view
Description
This command displays the network configuration for a specified network on your NAS cluster.
Syntax
system networking network-configuration view network
Where the argument is :
network
set
Description
This command allows you to change the network configuration for a specified network. You can change the network
name, teaming mode, and MTU for the network.
Syntax
system networking network-configuration set network teaming-mode mtu
Where the arguments are:
network
teaming-mode
Protocol to be mass rebalanced: nfs,
cifs, ndmp, other or all
The network name (possible value:
Primary)
The network name (possible value:
Primary)
The teaming mode (possible value: ALB
or LACP)
59