Dell PowerVault NX3600 Command Line Interface Manual page 58

protocol
policy
mass-failback
Description
This command allows you to mass-failback to client connections.
Syntax
system networking client-connections mass-failback
view
Description
This command displays the client connections for the specified client and system IP addresses.
Syntax
system networking client-connections view clientIp systemIp
Where the arguments are:
clientIp
systemIp
assign
Description
This command assigns the client connection to the specified client IP address, system IP address, and so on.
Syntax
system networking client-connections assign clientip systemip controller
[options]
Where the arguments are:
clientip
systemip
controller
the options are:
[-interface mac]
[-rebalance/-
norebalance]
mass-rebalance
Description
58
IP of the client or router
The IP used to access the system
The controller to which the client will be assigned
(e.g. controller0) or fill assign_contoller to return to
the assigned controller and interface
The interface MAC address to which the client will be
assigned; omit to allow any interface
Allow/disable this client to migrate to other
controllers when rebalancing the network load (The
default is allow)
Name of the protocol to be updated:
nfs, cifs, ndmp, or other
Policy to set: MANUAL, IMMEDIATE,
AUTOMATIC
- IP of the client or router
- The IP used to access the system