Terms And Definitions; Powervault Nx1950 Storage Solution Vs. Powervault Nx1950 Cluster Solution; Iscsi; Isns - Dell PowerVault NX1950 Deployment Manual

Terms and Definitions

The following sections describe the terms used in this document.
PowerVault NX1950 Storage Solution Vs. PowerVault NX1950 Cluster
Solution
Throughout this document, the term PowerVault NX1950 storage system
refers to the individual storage unit. The term PowerVault NX1950 storage
solution refers to the configuration of the storage unit along with the storage
arrays. The term PowerVault NX1950 cluster solution refers to the
configuration of more than one storage units and the storage arrays.

iSCSI

iSCSI is a standard that carries SCSI commands through Transfer Control
Protocol/Internet Protocol (TCP/IP)—a protocol that enables transport of
block data over IP networks, without the need for a specialized network
infrastructure, such as Fibre Channel.
In the context of system storage, iSCSI enables any client/machine (Initiator)
on an IP network to contact a remote dedicated server (Target) and perform
block I/O on it just as it would perform on a local hard disk.

iSNS

Microsoft iSCSI Internet Storage Name Service (iSNS) is a service that
processes iSNS registrations, deregistrations, and queries through TCP/IP from
iSNS clients and also maintains a database of these registrations (similar to a
DNS server). A common use for Microsoft iSNS Server is to allow iSNS clients
(Initiators and Targets) to register themselves and to query for other registered
iSNS clients. Registrations and queries are transacted remotely over TCP/IP .
You can download and install the iSNS server from the Microsoft Support
website at support.microsoft.com on a separate server that does not have
Microsoft iSCSI Initiator or Target installed.
NOTE:
For details about installing and configuring the iSNS server, see "Appendix"
on page 55.
8
Introduction