Related Manuals for MEHEN M30
Summarization of Contents
CHAPTER 1 RECEIVING, MOVING, UNPACKING
1.1 Precautions on Receiving
Guidelines for inspecting the machine package upon arrival.
1.2 Unpacking
Steps and safety measures for safely removing the machine from its packaging.
CHAPTER 2 GENERAL INFORMATION
2.1 Basic Information
Details about the machine's identity, including the nameplate.
2.2 Information About Machine
Overview of machine layout, components, and diagrams for identification.
2.3 Working Conditions
Specifies environmental and operational parameters for optimal machine performance.
2.4 Noise
Information regarding the noise level produced by the machine during operation.
CHAPTER 3 INSTALLATION
3.1 Position
Recommendations for selecting the optimal placement of the machine.
3.2 Room Condition
Requirements for the installation environment, focusing on ventilation and space.
3.3 Installation of Air-cooled Machine
Specific installation guidelines for machines with air-cooled condensers.
3.4 Installation of Water-cooled Machine
Specific installation guidelines for machines with water-cooled condensers.
3.5 Electrical Connection
Instructions for safely connecting the machine to the electrical power supply.
3.6 Change Cable
Procedure for replacing the main power cable if it is damaged.
3.7 Refrigerant Gas Refill
Guidance on refilling refrigerant gas, requiring a skilled technician.
3.8 Machine Testing
Procedures for verifying machine functionality after installation, including rotation and running tests.
CHAPTER 4 CONFIGURATION AND EXPLOSIVE DIAGRAM
4.1 Machine Configuration
Overview of the machine's internal components and system setup.
4.2 Driving Parts Diagram
Visual representation and list of components for the machine's driving system.
CHAPTER 5 CONTROLS AND OPERATION
5.1 Some Specified Concepts
Defines key terms and concepts necessary for understanding machine operation.
5.2 Electrical Control Panel
Description and identification of controls on the machine's electrical panel.
5.3 Main Specification of Controller
Technical specifications and operating ranges for the machine's controller.
5.4 Daily Operation
Step-by-step guide for routine daily use and operation of the machine.
5.5 Producing Programs
Details on the different production programs available for making various products.
5.6 Program Setting
Instructions on how to set and configure production programs for custom use.
5.7 Language
Guide on how to change the display language of the machine's controller.
5.8 Use Parameters Setting
Information on adjusting and setting user-specific parameters for machine operation.
5.9 Take Out the Product
Procedure for safely and efficiently removing the finished product from the machine.
5.10 Clean the Cylinder
Detailed steps for cleaning the machine's cylinder after use.
5.11 Door Open
Procedure for handling the cylinder door and its safety interlock.
5.12 Initialization the Controller
Steps to reset the controller to factory default settings, requiring technician involvement.
5.13 Error Alarm
Explanation of error messages and their potential causes and solutions.
5.14 Operation Under Error
Guidance on how to operate the machine when certain errors are detected.
5.15 A Typical Cleaning Operation
Walkthrough of a standard cleaning procedure for the machine.
5.16 Electric Diagram
Provides the electrical schematics for the machine's circuitry.
CHAPTER 8 SAFETY DEVICE
8.1 Safety Device Position
Locates the various safety devices installed on the machine.
8.2 Safety Device Explanation
Detailed explanation of the function and purpose of each safety device.
CHAPTER 9 MAINTENANCE
9.1 Routine Maintenance
Regular tasks to keep the machine in good working order.
9.2 Maintenance of Water-cooled Machine
Specific maintenance procedures for water-cooled condenser units.
9.3 Maintenance of Air-cooled Machine
Specific maintenance procedures for air-cooled condenser units.
9.4 Preventive Maintenance
Proactive maintenance steps to ensure long-term reliability and performance.
9.5 Order Spare Parts
Information on how to order replacement parts for the machine.
Need help?
Do you have a question about the M30 and is the answer not in the manual?
Questions and answers