Related Manuals for MEHEN M20
Summarization of Contents
FOREWORD
Handbook Instructions
Guidance on how to use the user manual effectively for operation and maintenance.
Symbols Annotation
Explanation of symbols and icons used throughout the manual for safety and information.
RECEIVING, MOVING, UNPACKING
Receiving and Unpacking Procedures
Steps for inspecting upon arrival, handling damage, and safely unpacking the machine.
Machine Storage Guidelines
Instructions for proper storage of the machine to prevent damage and maintain condition.
Packing Material Disposal
Guidance on the environmentally sound disposal of packaging materials according to local regulations.
GENERAL INFORMATION
Machine Nameplate and Specifications
Details found on the machine's nameplate, including model and technical data.
Machine Layout and Components
Identification of major components and the overall physical layout of the machine.
Operational Working Conditions
Specifies the required environmental and power conditions for optimal machine performance.
Noise Level Information
Details about the machine's operational noise level.
INSTALLATION PROCEDURES
Positioning, Room, and Initial Setup
Guidance on machine placement, room ventilation, and specific installation for air/water-cooled units.
Electrical Connection and Testing
Steps for safe electrical connection, refrigerant handling, and post-installation machine verification.
MACHINE CONFIGURATION AND DIAGRAMS
Configuration and Component Diagrams
Overview of machine configuration, driving parts, and blender assembly with diagrams.
CONTROLS AND OPERATION
Control Panel and Specifications
Overview of the touch screen controller, its concepts, and technical specifications.
Daily Operation and Program Modes
Guide to daily use and the four production programs: Hardness, Time, Temperature, Developer.
Program and Parameter Settings
Instructions for configuring production programs and user-defined operational parameters.
Language Selection
Procedure for changing the display language of the controller interface.
User Parameter Configuration
Detailed steps for setting and adjusting user-specific operational parameters.
Product Extraction and Cleaning
Procedures for safely removing the product and cleaning the internal cylinder.
Error Handling and Controller Reset
Managing errors, compressor overtime, and resetting the controller to factory settings.
Typical Production Cycle Execution
A step-by-step guide for performing a complete production cycle.
Electrical System Schematics
Detailed electrical diagrams illustrating the machine's wiring and component connections.
FREEZING SYSTEM DIAGRAM
Freezing System Components
A diagram illustrating the main parts of the machine's refrigeration and freezing cycle.
HYGIENE AND SAFETY
Hygiene and Food Safety Guidelines
Recommendations for maintaining cleanliness to ensure food safety and prevent contamination.
Safety Device Locations
Identification of where key safety devices are physically located on the machine.
Explanation of Safety Devices
Detailed description of each safety device, its purpose, and how it functions.
MACHINE MAINTENANCE
Routine Maintenance Tasks
Essential daily and regular checks and cleaning tasks for machine upkeep.
Specific Model Maintenance and Storage
Maintenance for water/air-cooled models and preparation for storage.
Spare Parts Ordering Process
Guidance on how to obtain replacement parts and components when needed.
TROUBLESHOOT GUIDE
Common Problem Diagnosis and Solutions
A comprehensive guide to identifying and resolving common operational issues and error messages.
Need help?
Do you have a question about the M20 and is the answer not in the manual?
Questions and answers