Related Manuals for Fisher & Paykel Ice & Water RS7621WLUK1
Summarization of Contents
General Safety and Warnings
Save These Instructions
Important safety instructions to be followed before installation or use.
Before Installation
Guidance on essential checks and preparations before commencing appliance installation.
Unpacking
Procedures and precautions to be taken during the appliance unpacking process.
Electrical and Plumbing Connections
Requirements for electrical and water supply connections, accessibility, and safety.
Integrated Column Models Overview
Positioning inside the cabinetry
Guidance on correctly positioning the appliance within the cabinetry.
Aligning inside the cabinetry
Ensuring the appliance is properly aligned and centered within the cabinetry.
Fixing inside the cabinetry
Steps for securely fixing the appliance within the cabinetry using low torque settings.
Installing the door panel
Procedures for installing either stainless steel or custom door panels onto the appliance.
Appliance Check and Pre-Installation
Check Your Appliance
Verifies that the appliance and its components are correct and complete before installation.
Remove Pre-Installed Parts
Instructions for removing parts that are pre-installed on the appliance for later use.
Moving Your Appliance
Moving to Installation Location
Detailed steps and precautions for safely moving the appliance to its installation location.
Overview of Supplied Parts
Door Panel Attachment Kit
Components included for attaching door panels to the appliance.
Install Fasteners Kit
Various screws and fasteners provided for the installation process.
Anti-Tip Bracket Assembly
Components required to secure the appliance and prevent tipping.
Additional Supplied Parts and Kits
Trims Install Kit (External Box)
External trim components provided for appliance installation.
Water Filter Kit
Components included for installing the water filter system.
Required Parts and Tools for Installation
Install Joiner Kit
Kit for dual or multiple appliance installations, purchased separately.
Toe Kick Panel Information
Information on the toe kick panel, not supplied, and dimensions for custom panels.
Required Tools List
List of tools required for installation, not supplied by the manufacturer.
Door Panel Sets and Handle Kits
Stainless Steel Door Panel Set
Details on the stainless steel door panel set, not supplied, and installation screws.
Door and Drawer Handle Kits
Various handle kit options available for RS61 and RS76 models with associated part numbers.
Hinge Change Kit Instructions
Left to Right Hinge Conversion
Components and models for converting left hinges to right hinges.
Right to Left Hinge Conversion
Components and models for converting right hinges to left hinges.
610mm Model Product Dimensions
Overall Dimensions
Specifies the overall height, width, and depth of the 610mm model appliance.
Product Weight
Details the weight of the 610mm model appliance with and without packaging.
610mm Model Cavity Dimensions
Frameless Cabinetry Dimensions
Cavity dimensions for flush installation with frameless cabinetry for the 610mm model.
Framed Cabinetry Dimensions
Cavity dimensions for flush installation with framed cabinetry for the 610mm model.
610mm Model Door Panel Dimensions
Stainless Steel Panel Dimensions
Dimensions and weight specifications for stainless steel door panels for the 610mm model.
Custom Panel Dimensions
Dimensions and weight specifications for custom door panels for the 610mm model.
610mm Model Custom Door Panel Dimensions
Top Panel Rear View Dimensions
Detailed dimensions and screw hole locations for the rear view of the top custom door panel.
Bottom Panel Rear View Dimensions
Detailed dimensions and screw hole locations for the rear view of the bottom custom door panel.
610mm Model Door Clearance
115° Door Opening Clearance
Clearance required for 115° door opening with full internal access for the 610mm model.
90° Door Opening Clearance
Clearance required for 90° door opening with limited internal access for the 610mm model.
610mm Model Drawer Clearance
Drawer Extension Dimensions
Specifies the maximum drawer extension when open for the 610mm model.
610mm Model Toe Kick Dimensions
Stainless Steel Toe Kick Dimensions
Dimensions for the stainless steel toe kick panel for the 610mm model.
Custom Panel Toe Kick Dimensions
Dimensions for custom toe kick panels for the 610mm model, including adjustable height.
Toe Kick Installation Options
Standard Toe Kick Height
Details the standard toe kick height with stainless steel door panels.
Custom Toe Kick Heights
Options for custom toe kick heights, including 2" and 6" options.
760mm Model Product Dimensions
Overall Dimensions
Specifies the overall height, width, and depth of the 760mm model appliance.
Product Weight
Details the weight of the 760mm model appliance with and without packaging.
760mm Model Cavity Dimensions
Frameless Cabinetry Dimensions
Cavity dimensions for flush installation with frameless cabinetry for the 760mm model.
Framed Cabinetry Dimensions
Cavity dimensions for flush installation with framed cabinetry for the 760mm model.
760mm Model Door Panel Dimensions
Stainless Steel Panel Dimensions
Dimensions and weight specifications for stainless steel door panels for the 760mm model.
Custom Panel Dimensions
Dimensions and weight specifications for custom door panels for the 760mm model.
760mm Model Custom Door Panel Dimensions
Top Panel Rear View Dimensions
Detailed dimensions and screw hole locations for the rear view of the top custom door panel.
Bottom Panel Rear View Dimensions
Detailed dimensions and screw hole locations for the rear view of the bottom custom door panel.
760mm Model Door Clearance
115° Door Opening Clearance
Clearance required for 115° door opening with full internal access for the 760mm model.
90° Door Opening Clearance
Clearance required for 90° door opening with limited internal access for the 760mm model.
760mm Model Drawer Clearance
Drawer Extension Dimensions
Specifies the maximum drawer extension when open for the 760mm model.
760mm Model Toe Kick Dimensions
Stainless Steel Toe Kick Dimensions
Dimensions for the stainless steel toe kick panel for the 760mm model.
Custom Panel Toe Kick Dimensions
Dimensions for custom toe kick panels for the 760mm model, including adjustable height.
Dual Appliance Installation Options
No Partition Clearance
Illustrates door opening clearance options without a partition between appliances.
With Partition Clearance
Illustrates door opening clearance options with a partition between appliances.
Dual 610mm Cavity Dimensions
Frameless Cabinetry Dimensions
Cavity dimensions for dual 610mm installations with frameless cabinetry.
Framed Cabinetry Dimensions
Cavity dimensions for dual 610mm installations with framed cabinetry.
Dual 610/760mm Cavity Dimensions
Frameless Cabinetry Dimensions
Cavity dimensions for 610mm + 760mm dual installations with frameless cabinetry.
Framed Cabinetry Dimensions
Cavity dimensions for 610mm + 760mm dual installations with framed cabinetry.
Dual 760mm Cavity Dimensions
Frameless Cabinetry Dimensions
Cavity dimensions for dual 760mm installations with frameless cabinetry.
Framed Cabinetry Dimensions
Cavity dimensions for dual 760mm installations with framed cabinetry.
Dual Install Toe Kick Panel Dimensions
Stainless Steel Panel Dimensions
Toe kick panel dimensions for dual stainless steel panel installations.
Custom Panel Dimensions
Toe kick panel dimensions for dual custom panel installations.
Power Supply Connection Dimensions
Single Installation Power Supply
Dimensions for power supply connections in a single appliance installation.
Dual Installation Power Supply
Dimensions for power supply connections in a dual appliance installation.
Appliance Electrical Specifications
Supply and Circuit Details
Details on electrical supply voltage, frequency, circuit requirements, and socket type.
Appliance Plumbing Specifications
Water Supply Requirements
Specifications for the water supply hose, pressure, and connection type.
Pre-Installation Checks and Preparations
Check the Cabinetry
Verifying cabinetry dimensions, floor level, and returns before proceeding with installation.
Check Power Supply and Water Connections
Ensuring proper electrical and water connections, grounding, and accessible isolation switches.
Installing the Anti-Tip Bracket
Locating Attachment Position
Determining the correct height and location for the anti-tip bracket attachment on the wall.
Installing the Bracket
Steps for placing and securing the anti-tip bracket to the back wall using screws.
Anti-Tip Bracket Installation Methods
For Plaster Board Wall
Instructions for fixing the anti-tip bracket to plaster board walls.
For Solid Wall Installation
Instructions for fixing the anti-tip bracket to solid walls using masonry plugs.
Connecting Water and Power Supply
Connecting to Water Supply
Steps for connecting the water supply hose to the appliance and water tap.
Connecting the Power Supply
Connecting to Power Supply
Steps for connecting the appliance's power cable to the electrical supply.
Appliance Position and Alignment in Cabinetry
Attaching the Barbed Plugs
Installing barbed plugs to protect cabinetry surfaces during appliance insertion.
Cabinetry Alignment Using Depth Gauges
Attaching the Depth Alignment Gauges
Attaching and using depth alignment gauges to ensure correct appliance positioning.
Positioning Appliance into Cabinetry
Positioning into the Cabinetry
Rolling the appliance into the cabinetry and ensuring proper overlap with the anti-tip bracket.
Aligning Appliance with Cabinetry Sides
Aligning with the Depth Gauges
Using depth gauges to check gaps between appliance and cabinetry side walls for even alignment.
Adjusting Appliance Alignment in Cabinetry
Adjusting the Alignment in Cabinetry
Adjusting appliance height using front and rear adjustment screws for proper alignment.
Securing Appliance to Cabinetry
Securing the Top Brackets
Fixing the top brackets to the cabinetry ceiling surface using countersunk screws.
Securing the Side Brackets
Fixing the side brackets to the lower sides of the cabinetry using countersunk screws.
Removing Hanging Brackets
Removing M8 Nuts and Washers
Detaching M8 nuts and washers from the door screws using a hex key and spanner.
Removing Top and Bottom Brackets
Removing the top and bottom hanging brackets from the appliance.
Installing Door and Drawer Panels
Attaching Refrigerator Door Handle
Securing the refrigerator door handle using specified screws.
Attaching Freezer Drawer Handle
Securing the freezer drawer handle using specified screws.
Attaching Door Panel Brackets
Attaching Top Hanging Bracket
Securing the top hanging bracket to the refrigerator door panel with screws.
Attaching Side Brackets
Securing spacer, side bracket, and slider to door/drawer panels with screws.
Attaching Bottom Hanging Bracket
Securing the bottom hanging bracket to the freezer door panel with screws.
Hanging Door Panels onto Hinges
Hanging the Refrigerator Door Panel
Holding and attaching the refrigerator door panel to the top hinges.
Adjusting Door Panel Fit and Depth
Adjusting Height of Door Panel
Adjusting the door panel height using adjustment screws for proper alignment.
Adjusting Depth of Door Panel
Adjusting the door panel depth by loosening side screws on the brackets.
Installing Locking Bracket
Loosening Bottom Screw
Loosening the screw at the bottom of the door to slide out the locking bracket.
Fixing Locking Bracket
Securing the locking bracket to the door panel with countersunk screws.
Installing Adjustment Brackets
Loosening Cap Screws
Loosening cap screws of adjustment brackets with a hex key.
Adjusting Brackets for Depth
Adjusting brackets for desired depth by moving them forward/backward.
Installing the Toe Kick Panel
Attaching the Mounting Plate
Re-attaching the toe kick mounting plate to the plinth and attaching air toe kick seal.
Attaching the Toe Kick Panel
Positioning and pressing the toe kick onto the mounting plate.
Installing Toe Kick Grilles
Installing the Top Grille
Reattaching the top grille using the provided screws.
Installing the Bottom Grille
Reattaching the bottom grille to the mounting plate.
Installing the Top Trim
Reinstalling the Top Trim
Sliding the top trim into the hinge pocket and engaging dual lock strips.
Installing the Water Filter
Inserting the Water Filter
Steps for inserting and locking the water filter into its casing using a removal tool.
Removing and Replacing the Filter
Instructions for removing the old water filter and replacing it with a new one.
Installing the Air Flow Divider
Removing Adhesive Layer
Removing the adhesive layer from the air flow divider before installation.
Reinstalling Air Flow Divider
Reinstalling the air flow divider to the bottom of the freezer drawer with screws.
Installing Cabinet Side Trims
Peeling Off Liners
Peeling off liners from the dual adhesive strips on the side trims.
Positioning the Trim
Positioning the side trim at an angle on the throat of the door hinge.
Installing Door and Drawer Side Trims
Install Door Top Extrusion
Aligning and clipping the top extrusion to the top of the door.
Install Door Side Extrusions
Fitting side trims into panel gaps on the sides of the door.
Install Drawer Trims
Attaching drawer top and side trims by removing backing and pressing firmly.
Dual Installation Setup: Central Spacer
Attach Central Spacer to Cabinetry
Measuring and marking for the central spacer, then fixing it to the cabinetry ceiling.
Dual Installation Alignment: Gauges and Plugs
Attaching Depth Alignment Gauges
Attaching depth alignment gauges to appliance sides for correct positioning.
Attaching Barbed Plugs
Inserting barbed plugs into cabinetry holes to protect surfaces.
Aligning First Appliance in Dual Installation
Aligning the First Appliance into Cabinetry
Rolling the first appliance into cabinetry and aligning it with anti-tip bracket and spacer.
Securing First Appliance in Dual Installation
Adjusting Height of First Appliance
Adjusting appliance height using screws to engage floor and reach ceiling.
Securing First Appliance Brackets
Fixing top and lower side brackets to the cabinetry using countersunk screws.
Aligning Second Appliance in Dual Installation
Aligning the Second Appliance into Cabinetry
Rolling the second appliance into cabinetry and aligning it with the first appliance.
Securing Dual Installation Brackets
Securing the Top Brackets
Securing appliance top caps and brackets to the central spacer and cabinetry ceiling.
Securing the Bottom Brackets
Securing bottom joiner brackets and side brackets to the cabinetry.
Changing Door Hinges (Optional)
Releasing Hinge Spring
Releasing the hinge spring by turning the T20 screw to the 'O' position.
Detaching the Door
Detaching the door from the appliance by unscrewing hinge screws.
Removing Door Hinges
Removing the Top Door Hinge
Steps for removing the top hinge, pocket cover, and bracket.
Removing the Middle Door Hinge
Steps for removing the middle door hinge and associated brackets.
Moving Sensor Housing for Hinge Change
Moving the Sensor Housing
Steps to unclip and move the hall sensor and sensor housing.
Reinstalling Door Hinges
Reinstalling the Top Hinge
Reinstalling the hinge top bracket, pocket, and cover on the new hinge side.
Reinstalling the Middle Door Hinge
Reinstalling the middle hinge bracket, spacer, and hinge.
Changing Door Brackets
Changing the Top Door Bracket
Removing and installing new top adapter brackets on the door.
Changing the Bottom Door Bracket
Removing and installing new bottom adapter brackets and locking brackets.
Reinstalling the Door After Hinge Change
Reinstalling the Door
Securing the door to the hinges and activating the hinge spring.
Final Installation Checklist
To Be Completed by the Installer
Checklist of essential tasks for the installer to complete before finishing the installation.
Need help?
Do you have a question about the Ice & Water RS7621WLUK1 and is the answer not in the manual?
Questions and answers