Related Manuals for Kenwood PD35-10
Summarization of Contents
General Information on PD Series Power Supplies
Key Features of PD Series Power Supplies
Details the compact size, excellent regulation, temperature stability, adjustable steps, V/I check, output switch, protection, and remote control.
Precautions for Safe Use of Power Supplies
Checking Input Voltage Requirements
Details how to verify and ensure the correct input voltage is supplied to the power supply unit.
Proper Power Cord Connection Procedure
Instructions on connecting the power cord safely, including the use of a connector retainer.
Output Terminal Connection Guidelines
Guidance on properly connecting output terminals and control terminals using jumpers and grounding.
Environmental Conditions for Operation
Specifies the recommended operating temperature, ventilation requirements, and suitable installation environments.
Front Panel Controls and Indicators Overview
Detailed Front Panel Component Identification
Detailed identification and description of all controls and indicators located on the front panel of the unit.
Operating the DC Power Supply
Operation as a Constant-Voltage Power Supply
Step-by-step instructions for operating the unit in constant voltage mode, including setting voltage and current limits.
Operation as a Constant-Current Power Supply
Detailed instructions for operating the unit in constant current mode, including setting current and voltage limits.
Checking Voltage and Current Output
Explains how to verify and set the output voltage and current using the V/I CHECK switch.
Advanced Applications of the Power Supply
Setting Overvoltage Protection (OVP) Level
Provides instructions on how to configure and verify the overvoltage protection settings.
Utilizing Rear Panel Terminals
Explains the function and usage of rear panel terminals for various control and operation modes.
Implementing Remote Sensing
Details the procedure for implementing remote sensing to compensate for voltage drops in output lines.
Remote Control of Constant Voltage
Explains how to remotely control output voltage using external resistance or voltage signals.
Remote Control of Constant Current
Outlines procedures for remotely controlling output current via resistance or voltage.
Series and Parallel Connected Operation
Series Connection of Multiple Units
Describes how to connect multiple units in series to sum output voltages and control them from a master unit.
Parallel Connection of Multiple Units
Details the process of connecting multiple units in parallel to sum output currents, controlled by a master unit.
Battery Charging and Discharging Operations
Constant-Current Battery Charging
Instructions for setting up and performing constant-current charging of batteries or capacitors.
Constant-Current Battery Discharging
Guidance on how to discharge batteries using a load resistor and the power supply's constant current mode.
Maintenance and Adjustment Procedures
Internal Maintenance and Case Removal
Instructions on how to access the internal components of the power supply by removing the case.
Voltage Conversion for Different Line Inputs
Details the process for converting the device to operate with different line voltages by changing transformer and fuse.
Calibration and Adjustment Procedures
Voltage Adjustment Steps
Covers specific adjustments for voltage reference offset, gain, and meter readings.
Current Adjustment Steps
Details adjustments for current reference offset, gain, and meter readings.
Available Accessories
Optional Accessories for PD Series
Details specific optional accessories like rack adapters and interface adapters.
Need help?
Do you have a question about the PD35-10 and is the answer not in the manual?
Questions and answers