Kenwood PS-430 Manual

'KENWOOD
PS-430
DC POWER SUPPLY
The PS-430 DC Power Supply has been carefully
engineered and manufactured under rigid quality
standards, and should give you satisfactory and depend-
able operation for many years.
Before placing the equipment in service, we suggest you
read through this manual to become acquainted with
correct operation. Should any trouble arise with the
unit, please contact your dealer.
POWER ON indicator (red)
M@ AFTER UNPACKING
Save the boxes and packing in the event your unit needs to
be transported for operation at a remote location, main-
tenance, or service.
INTRODUCTION
The Model PS-430 is a regulated DC power supply design-
ed to match the KENWOOD TS-440S/430S transceiver
and provide reliable fixed-station operation. External
output terminals (10 A max.) for operation of additional
equipment are also provided.
H@ ACCESSORIES
The following accessories are included
Operating manual (B50-4014-10). . 1 copy
Fuse (6A) (F05-6021-05) ...... 1 piece
Fuse (4A) (F05-4022-05) ...... 1 piece
POWEL COU, in cn cc se e's 1 piece
@ INSTALLATION
When using the bail, swing it fully forward to place the
TS-440S/430S at the same height as that of the transceiver.
(--
This indicator lights when
the Power Supply is ON.
© POWER
ON @ OFF
POWER Switch
This switch turns power
ON.
KENWOOD Ps-
OC POWER Peay
Fig. 1
TS-440S/430S
ANT mle
X. VERTER
DCI3.8V 20A
©O
BAIL
Used to elevate the front
of the supply.
Turn the Power Switch OFF before making connections.
Connect the AC power cord as shown in Fig. 2.
PS-430 Power supply
External output
terminal
AC outlet