Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PUMATRONIX ITSCAM 411
Summarization of Contents
Models
Image Sensors
Details of image sensors for ITSCAM 401 and ITSCAM 411 models.
1. Knowing the Product
Lenses and Image Sensors
Details on the types of lenses and image sensors available for the ITSCAM 400.
Inputs and Outputs
Description of the hardware input and output ports and their functionalities.
Data Transmission over the Network
Explains how images are transmitted digitally via the network interface using TCP/IP.
Format of Transmitted Images
Information on image transmission formats (BMP, JPEG) and quality settings.
Supported Servers
Details on how the ITSCAM 400 communicates with different server types.
Digital Signature
Explanation of digital signature functionality for image security.
2. Additional Documentation
Product Manuals and Guides
List of available manuals and guides for ITSLUX, VIGIA+, and ITSCAM 400.
3. Generated Information
JPEG Comments
Details on the JPEG comment format and its use for metadata.
Automatic License Plate Recognition
Explains the Automatic License Plate Recognition (OCR) functionality and requirements.
Sending by RS-232 Compatible com Wiegand 26
Details on communicating with Wiegand controllers using RS-232 and the License Plate List File.
License Plate List File
Describes the format and loading of the CSV file for Wiegand 26 protocol.
Geographic Location - GPS
Explains how to embed location coordinates using an external GPS antenna.
Vehicle Counting Function
Details on using the ITSCAM 400 as a vehicle counter and its installation.
4. Mechanical Specifications
Interfaces
Description of the available connectors like Ethernet and Microfit.
Temperature and Dimensions
Specifications for operating temperature, dimensions, and weight of the device.
5. Electrical Specifications
Electrical Connections
Description of the electrical connections via Ethernet and Microfit connectors.
Input/Output Signal Circuit
Explanation of the isolated input/output signal circuit and protection resistors.
Output Signal Status Selection
How to configure output ports for illuminator flash or remote equipment activation.
Flash or Illuminator Shot
Synchronization of flash trigger with sensor exposure for optimal illumination.
6. Software Specifications
Image Capture Architecture
Details on how image capture is triggered by various methods.
Virtual Trigger
Software-based trigger using image analysis for vehicle detection.
Motion Detector
Using Motion Detector for optimizing image processing in low vehicle flow.
Multiple Exposures
Functionality for capturing multiple sequential images for better identification.
Majority Vote
Selecting the best photo from multiple exposures for reliable license plate detection.
Day or Night Operating Mode
Automatic switching between day and night modes based on lighting conditions.
8. Initial Setup
Installation Prerequisites
Conditions and recommendations for installing the ITSCAM 400.
ITSCAM 400 Positioning
Best practices for positioning the ITSCAM 400 for optimal performance.
Settings for LPR (License Plate Recognition)
Steps to configure the ITSCAM 400 for automatic license plate reading.
Required Installation Conditions
Notes on installation location requirements and consulting technical support.
Network Interface Parameterization
Details on default network settings and IP address recovery.
10. Care and Maintenance
Firmware Upgrading
Process for updating the ITSCAM 400 firmware via Pumatronix website or software.
Preventative Maintenance
Procedure for cleaning the ITSCAM 400 lenses and protective case.
11. General Conditions of the Warranty
Situations in which the Product Loses the Warranty
Conditions that will void the ITSCAM 400's warranty.
Need help?
Do you have a question about the ITSCAM 411 and is the answer not in the manual?
Questions and answers