Installing System Components; Recommended Tools; Removing And Installing The Front Bezel; Installing The Front Bezel - Dell PowerVault MD3260 Owner's Manual

Installing System Components

Recommended Tools

You may need the following items to perform the procedures in this section:
• #2 Phillips screwdriver
• T8 and T15 Torx screwdrivers
• Wrist grounding strap connected to ground

Removing And Installing The Front Bezel

Installing The Front Bezel

You must install the front bezel on the system to secure the disk drawers against accidental removal.
1. Align the slots on the back of the bezel with the guide pins on the front of the chassis.
2. Push the bezel toward the chassis until the bezel is seated properly and the release latches snap into place.
Figure 15. Removing and Installing the Front Bezel
1. release latches (2)
2. front bezel
3. guide pins (4)
3
23