Table of Contents
Advertisement
CCD-TR86/TR96/TR506/TR506PK/TR507/TR916
CCD-TR501E/TR502E/TR503E/TR506E/TR620E/TR720E/TR740E
SERVICE MANUAL
B MECHANISM
• CCD-TR506PK is model that carring bag are added
in CCD-TR506.
• CCD-TR506PK is different from CCD-TR506 only
in the accessory and packing materials.
MICROFILM
Photo : CCD-TR506E
SPECIFICATIONS
CCD-TR86/TR96/TR916(NTSC)
Canadian Model
CCD-TR86/TR96(NTSC)
CCD-TR501E/TR502E/TR620E(PAL)
CCD-TR506/TR507(NTSC)
CCD-TR501E/TR502E/TR503E/
TR506E/TR720E/TR740E(PAL)
Australian Model
CCD-TR501E/TR503E(PAL)
Hong Kong Model
CCD-TR503E/TR720E(PAL)
Tourist Model
For MECHANISM ADJUSTMENT, refer to
the "8mm Video MECHANICAL
ADJUSTMENT MANUAL
— Continued on next page —
VIDEO CAMERA RECORDER
(
)
NTSC
(
)
PAL
RMT-713
US Model
AEP Model
UK Model
E Model
CCD-TR501E(PAL)
" (9-973-801-11).
Advertisement
Table of Contents
Related Manuals for Sony Handycam CCD-TR506E
Summarization of Contents
1. GENERAL
Getting Started and Basic Operations
Covers initial setup, basic recording, playback, and camera functions.
Advanced Operations and Additional Information
Details special functions, maintenance, tips, and troubleshooting.
2. DISASSEMBLY
Component Removal Procedures
Detailed steps for removing boards, lenses, EVF, and other internal parts.
Internal Views and Circuit Board Locations
Diagrams illustrating internal layout and identifying circuit board positions.
3. BLOCK DIAGRAMS
System Block Diagrams
High-level diagrams for overall system, camera, video, audio, control, EVF, servo, and power.
4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
Schematic and PWB Layouts
Detailed circuit schematics and printed wiring board layouts for troubleshooting.
6-1. CAMERA SECTION ADJUSTMENT
Preparations, Tools, and Remote Commander Use
Guidance on service tools, precautions, remote commander operation, and page F data.
Specific Camera System Adjustments
Detailed steps for adjusting voltage, HALL, flange back, color reproduction, white balance, and EVF.
6-2. MECHANISM SECTION ADJUSTMENTS
Mechanism Operation and Tape Path Adjustment
Instructions on operating the mechanism, loading/ejecting tape, and adjusting tape path.
Mechanism Component Adjustments
Steps for adjusting motors, gears, springs, and other mechanical parts.
6-3. VIDEO SECTION ADJUSTMENT
Video Adjustment Preparations and Power Checks
Lists required equipment, precautions, power supply checks, and mode settings for video adjustments.
System Control, Servo, and Key Input Adjustments
Covers adjustments for system control, servo, emergency codes, key inputs, and bit value discrimination.
Need help?
Do you have a question about the Handycam CCD-TR506E and is the answer not in the manual?
Questions and answers