Dell PowerVault MD3200 Installation Manual page 9

• To enable or disable authentication:
# cimconfig -s enableAuthentication={false | true}
–p
• To add a user for defining the credentials for CIM client to authenticate
with the CIM server:
# cimuser -a -u username -w password
• To remove a user:
# cimuser -r -u username -w password
• To enable or disable service location protocol (SLP):
# cimconfig -s slp={true | false} -p
If SLP is enabled, see Table 2-1 for additional settings information.
Commands are of the format
cimconfig -s <propertyName>={true|false} -p
where <propertyName> is a column heading in Table 2-1.
Table 2-1. Additional Setting Information if SLP is Enabled
runinternal registerExternal
PegasusSLP PegasusSLP
true false
false true
false false
propertyName
registerExternal
OpenSLP
false
false
true
Installing and Uninstalling the SMI-S Provider
register
Multiple
SLP
false Internal Pegasus SLP is
started when CIM server
starts.
false External Pegasus SLP
registration is run in
cimserver with a default
registration timeout set to
3 hours (same as the SLP
default timeout).
false External OpenSLP
registration is run in CIM
server.
Behavior
9