Tpm (Security Chip) Setting Submenu Of The Security Menu - Fujitsu T5010 - LifeBook Tablet PC Bios Manual

TPM (Security Chip) Setting Submenu of the Security Menu

The TPM (Security Chip) Setting submenu is used to enable or disabled the embedded security chip.
Info
Security Chip:
Current TPM State:
Change TPM State:
Clear Security Chip:
F1 Help
ESC Exit
Table 17: Fields, Options and Defaults for TPM (Security Chip) Submenu of Security Menu
Menu Field
Security Chip:
Current TPM State:
Change TPM State:
Clear Security Chip
Phoenix SecureCore(tm) Setup Utility
System Advanced
TPM (Security Chip) Setting
[Enabled]
Disabled and Deactivated
[No Change]
[Enter]
Select Item
Select Menu
Figure 17. TPM (Security Chip) Setting Submenu
Options Default
■
Disabled [Enabled]
■
Enabled
–— Disabled and Deactivated
■
No Change [No Change]
■
Disable and
Deactivate
■
Enter [Enter]
Security Boot
-/Space Change Values
Enter Select Sub-Menu
Description
Allows you to enable or disable the security chip. Note
that this is only active if a Supervisor Password has been
entered. A reboot is required after exit to configure the
Security Chip correctly. Clear Security Chip option
becomes selectable after reboot.
Indicates the current state of the TPM chip.
Allows you to enable or disable the TPM chip when the
Supervisor Password has been set.
Allows you to clear the Security Chip. Note that this does
not allow you to access already-encrypted data.
S e c u r i t y M e n u
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
25