Hard Disk Security Submenu Of The Security Menu - Fujitsu T5010 - LifeBook Tablet PC Bios Manual

L i f e B o o k T S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Info
Drive0:
* Set Master Password
* Set User Password
Drive1:
Set Master Password
Set User Password
Password Entry on Boot:
* Hard Disk Password cannot be set or changed if
the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shut
down the system, then Hard Disk Password
can be set or changed on next boot.
F1 Help
ESC Exit
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0: ___
Set Master ___
Password
Set User
___
Password
Drive1: ___
22
Phoenix SecureCore(tm) Setup Utility
System Advanced
Hard Disk Security
Select Item -/Space
Select Menu Enter
Figure 15. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must
be used to access the hard drive if it is used in another system. Note that the pass-
word will not take effect until the system has been rebooted.
[Enter] Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must be
used to access the hard drive if it is used in another system. Note that the password
will not take effect until the system has been rebooted.
Clear Display-only. Default is Clear. When the Drive1 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered. When only one drive is
installed (Drive 0:), [Not available] appears here.
Security Boot
Clear
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
[Enabled]
Change Values
Select Sub-Menu
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit