Removing An Sd Card - Fujitsu Q550-62GB-02 User Manual

I
NSTALLING OR REMOVING AN
BOOTUP PROCESS MAY DAMAGE THE CARD AND
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD
1
See your specific card manual for instructions on the installation of your card. Some cards may require that your
Tablet PC is off while installing them.
2
Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
3
With the product label facing in the same direction as the display screen, insert your card into the slot.
4
Push the card firmly into the slot until it is seated in the connector.

Removing an SD Card

To remove an SD Card, follow these easy steps:
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD
MAY REQUIRE YOUR
1
Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].
2
Push the SD Card in until it unlatches. It will then eject from the slot for removal.
SD C
ARD DURING YOUR
,
YOUR
STYLISTIC T PC
ABLET TO BE IN
52 - Secure Digital Cards
STYLISTIC T
ABLET
/ STYLISTIC T
OR YOUR ABLET
STYLISTIC T PC,
ABLET
S M O
LEEP ODE OR FF WHILE REMOVING THEM
PC'
S SHUTDOWN OR
PC.
.
OR BOTH
. S
OME CARDS
.