Fujitsu P1630 - LifeBook Tablet PC Bios Manual page 20

L i f e B o o k P S e r i e s B I O S
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Drive0:
Set Master Password
Set User Password
Password Entry on Boot:
F1
ESC
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0: ___
Set Master
___
Password
Set User Password
___
Password Entry on Disabled
Boot:
Enabled
20
Phoenix SecureCore(tm) Setup Utility
Info System Advanced
Hard Disk Security
Clear
[Enter]
[Enter]
[Enabled]
Help Select Item
Exit Select Menu
Figure 13. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
[Enter] Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.
[Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
Security Boot
-/Space Change Values
Enter Select Sub-Menu
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit