Advertisement
Quick Links
Advertisement
Related Manuals for Electric Bike Company E
Summarization of Contents
Initial Handlebar Setup
Adjusting Handlebar Stem Bolt
Loosen stem bolt with 6mm Allen key, align handlebars, and tighten to 22 Nm.
Securing Handlebars
Loosen clamp bolts with 5mm Allen key, position handlebars, and tighten to 14 Nm.
Optional Adjustments
Adjusting Stem Angle
Optional: Loosen stem angle bolt with 5mm Allen key and tighten to 13 Nm.
Positioning LCD Display
Adjust the LCD screen to an approximate 45° angle or your preferred position.
Powering On the Bike
Activating Master Switch
Turn the master switch on for specific bike models (C&S, Y, X).
Powering On LCD Controller
Press the power button on the left handlebar for 1 second to turn on the LCD.
Riding Modes
Using the Throttle
Hold the throttle to move the bike forward; it is live when the bike is on.
Using Pedal Assist
Activate Pedal Assist by holding the down arrow; set speed from 0 to 5.
Charging and Lights
Battery Charging (Models X, Y, R&E)
Connect the charger to the bike and power outlet; check LED status.
Charging Models C & S
Charge via rear rack battery case or with a 3.5 amp charger.
Activating Head and Tail Lights
Press and hold the Up arrow for 3 seconds to turn lights on/off.
Safety and Warranty
Troubleshooting Sleep Mode
Wake the battery from sleep mode by cycling the master power switch on/off.
Battery Safety and Charging Reminders
Follow charging guidelines, charge every 1-2 months, and review warranty terms.
Pre-Ride Brake Check
Ensure front and rear disc brakes match before beginning your ride.
Need help?
Do you have a question about the E and is the answer not in the manual?
Questions and answers