Related Manuals for V&T V6 Series
Summarization of Contents
Chapter 1 Introduction of crane series inverter
1.1 Product Model Description
Describes how inverter model fields indicate product series, power class, and software/hardware versions.
1.2 Product Nameplate Description
Explains the components and information found on the inverter's nameplate.
1.3 Product Series
Details the product series of V6-GH and V5-GH, including power ratings and application types.
1.4 Product Outline, Mounting Dimension, and Weight
Provides physical dimensions and weight specifications for various inverter models.
1.5 Brake resistor selection
Guides on selecting appropriate braking resistors based on inverter specifications and application needs.
Chapter 2 Installation and Wiring of the Inverte
2.1 Product and peripheral device connections and instructions
Illustrates the connection diagram and provides instructions for peripheral devices.
2.2 Functions of Main Circuit Terminal
Details the functions of the main circuit terminals for different inverter models.
2.3 Control loop wiring
Explains the wiring configurations for the control loop, including terminal symbols and technical specifications.
2.4 Terminal Wiring diagram
Presents a comprehensive wiring diagram for the inverter's terminals and connections.
Chapter 3 Operation Panel Instructions
3.1 Introduction to Operation Panel
Provides an overview of the digital panel, its indicators, and button functions.
3.2 Keyboard parameter change process
Details the step-by-step procedure for changing parameters using the keyboard interface.
3.3 Operation Example
Demonstrates practical examples of parameter setting and operation procedures.
Chapter 5 Debugging process
5.1 Confirm the wiring correct connected and firm
Verifies correct and secure wiring of the inverter and its components before operation.
5.2 Self-learning parameters setting
Guides on performing auto-tuning for motor parameters and recording results for later use.
5.3 With encoder control parameters setting
Explains parameter settings required for inverters utilizing encoder feedback for control.
5.4 Startup parameters setting
Details essential parameter settings for initiating the inverter and motor operation correctly.
5.5 Speed given mode
Describes how to set the speed reference mode for inverter control.
5.6 Brake control parameters setting
Covers the configuration of parameters related to the brake control system for safe operation.
5.7 Conical motor debugging
Provides specific debugging steps for conical motors, focusing on brake control and torque boost.
5.8 Position control calculation
Explains how to calculate and set position control parameters for precise movement.
5.9 Parameters copy function for batch debugging
Describes how to copy parameter settings from one inverter to another for efficient setup.
5.10 Method of operating a inverter without a motor
Outlines the procedure to operate the inverter without a motor connected, including necessary parameter adjustments.
5.11 Parameter monitoring and input terminal status monitoring
Explains how to monitor inverter parameters and the status of input terminals during operation.
Chapter 6 Crane specialinverter faults and troubleshooting
6.1 Fault Display
Lists fault codes, descriptions, possible causes, and countermeasures for inverter errors.
6.2Hoisting equipments causes of common failures and analysis
Analyzes common failures in hoisting equipment and provides solutions and troubleshooting tips.
Need help?
Do you have a question about the V6 Series and is the answer not in the manual?
Questions and answers