Related Manuals for crescendo SYMPHONY S6
Summarization of Contents
Installation Preparation
Amplifier Location Guide
Guidance on selecting a suitable mounting location for the amplifier, emphasizing air circulation and heat dissipation.
Battery Disconnection and Wiring Warning
Crucial safety instruction to disconnect battery and warning about incorrect wiring connections.
SYMPHONY Amplifier Installation Notes
Impedance and Fuse Requirements
Details minimum impedance requirements and external fuse ratings for SYMPHONY amplifier models.
Installation Procedure Steps
Step-by-step guide for mounting amplifiers, connecting power, ground, and remote wires, and speaker connections.
Power, Remote, and Ground Connections
12V Power Connection Details
Instructions for connecting the 4-gauge power and ground cables to the amplifier's power terminal.
Remote Turn-On Connection
Guidance on running and connecting the remote turn-on cable to the amplifier's REM terminal.
Ground Connection Best Practices
Instructions for locating and connecting a secure, low-resistance ground point to the amplifier.
Monoblock Amplifier Overview
RCA Inputs, Outputs, and Gain
Connects audio signals and matches headunit output voltage to amplifier input.
Indicator Lights and Controls
Explains LEDs, filters, bass boost, and remote control for amplifier operation.
Terminal Connections Explained
Details power, ground, remote, and speaker terminal block usage for monoblock amplifiers.
S1-v2/S1 Plus Speaker Wiring Diagram 1
S1 Impedance Warning (1 ohm)
Critical warning about the minimum impedance requirement of 1 ohm for S1-v2 and S1 Plus models.
S1-v2/S1 Plus Speaker Wiring Diagram 2
S1 Stereo Wiring (4-2 ohms)
Illustrates speaker connection for S1-v2 and S1 Plus models with a 4-ohm load in stereo.
S2/S4 Multi-Channel Connections
RCA Inputs, Gain, and Mode
Connects signals, matches voltage, and selects 2CH/4CH output configurations.
Filter Controls and Indicators
Controls HPF/LPF, explains LEDs, and optional remote control for S2/S4 amplifiers.
Terminal Connections for S2/S4
Details power, ground, and speaker terminal block connections for S2/S4 multi-channel amplifiers.
S2 Speaker Wiring Diagram 1
S2 Impedance Warning (2ohm/4ohm)
Critical warning about minimum impedance for S2 models: 2 ohms stereo, 4 ohms bridged.
S2 Speaker Wiring Diagram 2
S2 Stereo and Bridged Wiring
Illustrates speaker connections for S2 models in stereo (4-2ohms) and bridged (8-4ohms) modes.
S4 Speaker Wiring Diagram 1
S4 Impedance Warning (2ohm/4ohm)
Critical warning about minimum impedance for S4 models: 2 ohms stereo, 4 ohms bridged.
S4 Speaker Wiring Diagram 2
S4 Stereo and Bridged Wiring
Shows speaker connections for S4 models in 4CH stereo and bridged configurations.
S6 Multi-Channel Connections
RCA Inputs, Gain, and Mode
Connects signals, matches voltage, and selects CH2/CH4/CH6 output configurations.
Filter Controls and Indicators
Controls HPF/LPF, explains LEDs, and optional remote control for S6 amplifiers.
Terminal Connections for S6
Details power, ground, and speaker terminal block connections for S6 multi-channel amplifiers.
S6 Speaker Wiring Diagram 1
S6 Impedance Warning (2ohm/4ohm)
Critical warning about minimum impedance for S6 models: 2 ohms stereo, 4 ohms bridged.
S6 Speaker Wiring Diagram 2
S6 Stereo and Bridged Wiring
Illustrates speaker connections for S6 models in stereo (4-2ohms) and bridged (8-4ohms) configurations.
Troubleshooting Common Issues
No Sound or Output Problems
Troubleshooting steps for no audio output, checking connections, fuses, and speakers.
Protection Mode Causes
Diagnosing protection mode issues: impedance, overheating, shorts, voltages, and input signals.
Distortion and Noise Resolution
Resolving audio distortion and noise by checking input levels, speaker quality, and grounding.
Poor Bass Response Troubleshooting
Troubleshooting poor bass response by checking speaker cables and polarity.
Crescendo Audio Warranty
Limited Warranty Terms
Details the 1-year limited warranty, coverage, exclusions, and non-transferable nature.
Warranty Returns and Contact Info
Information on returning amplifiers for warranty, packaging, and contact details for inquiries.
Need help?
Do you have a question about the SYMPHONY S6 and is the answer not in the manual?
Questions and answers