HP 4000/6000/8000 Release Note page 5

Table 1 Operating system specifications
OpenVMS version
OpenVMS 7.3-2
OpenVMS 8.2
OpenVMS 8.2 IA64
OpenVMS 8.2–1 IA64
For the current Fibre SCSI ECO kit for OpenVMS, see the following HP IT Resource Center web site:
http://www.itrc.hp.com
FCA support
Table 2 lists the supported Fibre Channel Adapters (FCAs) and the required firmware versions.
Table 2 FCA (HBA) support
FCA (HBA)
HP StorageWorks DS-KGPSA-CA 1Gb, 64-bit/33MHz PCI
HP StorageWorks DS-KGPSA-DA 2Gb, 64-bit/66MHz PCI
HP StorageWorks DS-KGPSA-EA 2Gb, 64-bit/133MHz PCI-X
HP StorageWorks DS-A5132-AA 2Gb, 64-bit/133MHz
PCI-X
HP StorageWorks DS-A5134-AA 2Gb, 64-bit/133MHz
PCI-X Dual
HP StorageWorks A6826A 2Gb, 64-bit/133MHz PCI-X Dual
(Only supported on Integrity servers)
HP StorageWorks A9782A 2Gb, 64-bit/133MHz PCI-X
1000Base SX
(Only supported on Integrity servers)
HP StorageWorks A9784A 2Gb, 64-bit/133MHz PCI-X
1000Base T
(Only supported on Integrity servers)
Switch support
This release supports the Fibre Channel switches and firmware versions listed in the HP StorageWorks
SAN design reference guide which can be downloaded from the following web site:
http://h18004.www1.hp.com/products/storageworks/san/documentation.html
NOTE:
HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best
practice to uniformly upgrade all switches in the SAN.
Alpha servers support
Table 3 lists the EVA-compatible Alpha servers.
Fibre SCSI ECO kit
DEC-AXPVMS_VMS732_FIBRE _SCSI_V0400
N/A
N/A
N/A
4000/6000/8000 Enterprise Virtual Array connectivity 5.0D for OpenVMS release notes
Driver
Adapter firmware
(minimum)
Native 3.92a2
Native 3.92a2
Native 1.90a4
Native 1.90a4
Native 1.90a4
Native
N/A
(Loaded by the driver)
Native
N/A
(Loaded by the driver)
Native
N/A
(Loaded by the driver)
5