Dell Streak User Manual page 160

If the device cannot power on due to system corruption, take either of
these recovery actions:
Reset your device to the default state
Press and hold the power button
1
option on the screen to turn off the device.
Simultaneously press and hold the volume up button
2
down button
Without releasing the volume buttons, press and hold the power button,
3
until the device turns on the configuration screen.
Press the volume buttons to move the highlight bar on the screen to the
4
Factory reset option.
Press the Camera button
5
Wait for the device to reboot.
6
Start software recovery
Take out the microSD card from the device.
1
Connect the microSD card to your computer using a microSD adapter.
2
On your computer, go to support.dell.com and follow the instructions to
3
download the software upgrade package to the microSD card.
NOTE:
"Update.pkg". Rename the downloaded package to "Update.pkg" if it is
not named so.
Disconnect the microSD card from the computer and install the microSD
4
card into the device.
Follow steps 1 to 3 in Reset your device to the default state to turn on the
5
configuration screen.
Press the volume buttons to move the highlight bar to the Software
6
upgrade via Update.pkg on SD Card option, and press the Camera button
to confirm your selection.
Press the Camera button
7
NOTE:
If you wish to cancel software recovery, press the volume down
button
Wait for the device to load files and reboot the system.
8
160
Troubleshooting
.
The device only recognizes the software upgrade package as
.
and then touch the Power off
to start the reset process.
to confirm and start software recovery.
and volume