Related Manuals for G-WEIKE LG Series
Summarization of Contents
Safety Precautions
General Safety Advice
Covers general safety advice and precautions for operating the machine.
Machine Introduction
1.1 Machine Model Instructions
Explains how to interpret G.weike laser machine model designations.
1.2 Machine Compositions
Details the main components of the laser machine.
1.2.2 Movement Mechanism Components
Describes the compositions of the movement mechanism.
Machine Components and Systems
1.2.2.1 Plane Movement Mechanism
Details the X and Y axis movement mechanisms.
1.2.3 Optical Mechanism
Explains the optical principle and light route of LC and LG machines.
1.2.4 Dual-Laser Head Mechanism
Describes the structure of the electric dual-laser head.
1.2.7 Working Platform
Describes the beehive and strip soleplate working platforms.
System Configuration and Safety
1.3 System Configuration
Lists machine components, manufacturers, and types.
1.4 Operating Environment
Specifies humidity, temperature, and power supply conditions.
Chapter 2 Safety Rules
Introduces safety warnings for personnel and the machine.
Safety Guidelines and Personnel
2.1 Product Safety
Lists conditions for ensuring safe work and operation.
2.4 Personnel Requirements
Outlines training, qualifications, and responsibilities for personnel.
2.5 Special Product Risks
Details specific risks associated with the laser machine.
Product Risks and Hazards
2.5.1 Laser Radiation Risk
Explains laser classification and potential hazards from radiation.
2.5.3 Risk of Electric Shock
Warns about high voltage and the risk of electric shock from the laser module.
2.5.4 Processing Outgrowth Hazards
Explains hazards from processing byproducts like smoke and dust.
2.5.5 Optical System Risks
Discusses risks related to polluted or damaged optical parts.
Machine Installation Process
3.1 Machine Installation
Details the steps for installing the machine.
3.1.1 Steps of Unpacking
Provides instructions for safely unpacking the machine.
3.1.3 Preparations for Installation
Lists requirements for installation site, personnel, and tools.
3.1.4 Steps of Installation
Outlines the sequence of steps for machine installation.
Installation Steps
3.1.4.1 Laser Tube Installation
Details how to mount and install the laser tube.
3.1.4.2 Install Power Supply
Provides steps for installing the laser power supply.
3.1.4.4 Air Pump Installation
Explains how to connect the air outlet of the air pump to the machine.
3.1.4.6 Equipment Earthing
Stresses the importance of safe earthing for the power supply system.
Equipment Debugging
3.2.1 Power-On/Off Sequence
Details the correct sequence for powering the machine on and off.
3.2.2 Movement Debugging
Explains how to check the movement status of each shaft.
3.2.2.2 Resolution Setup
Explains how to set movement resolution and pulse equivalent for accuracy.
3.2.2.3 Stroke, Limit and Reset
Details how to set stroke limits and reset parameters for machine protection.
Laser Debugging and Trial Operation
3.2.3.1 Light Emitting Test
Explains how to test laser emission and identify potential issues.
3.2.3.2 Light Route Adjustment
Describes how to adjust the laser light route to correct deviations.
3.2.4 Trial Operation of Processing
Guides on performing trial processing after debugging.
System Maintenance
4.1 Mechanical Maintenance
Details maintenance for mechanical parts like guide rails and belts.
4.2 Electric Maintenance
Covers maintenance of electric parts, sensors, buttons, and indicators.
4.3 Light Route Maintenance
Discusses maintenance of reflectors and focusing lenses in the light route.
4.4 Auxiliary Parts Maintenance
Covers maintenance of auxiliary components like water tanks and blowers.
Post
Company Information
Provides contact details and website for G.Weike.
Need help?
Do you have a question about the LG Series and is the answer not in the manual?
Questions and answers