Introduction - HP HSG80 - StorageWorks RAID Array Controller Release Note

Introduction

The StorageWorks Command Console (SWCC) provides a graphical user
interface that can be used to configure and monitor your storage subsystem. Use
of SWCC is highly recommended. Refer to the HP StorageWorks Command
Console V2.5 User Guide for information about installing and using SWCC.
The SWCC Agent is compiled for each operating system it supports, and is
installed on the host system. The SWCC Client is installed on a Windows Client
within the enterprise.
Identifying Your SWCC Software Revision Level
The SWCC User Guide is identified as V2.5, which refers to the entire software
suite revision. The SWCC Client software suite included in this release of the
Solution Software kit consists of the following components:
In the above list, the name of each executable is given with its subfolder relative to
the installation folder of the SWCC Client kit.
Verification of the individual components can be done with Explorer by
right-clicking on the particular executable program in its folder and selecting the
Properties option. In the resulting Properties window, click on the Version tab and
select the Product Version to display the version of the program.
Command Console V2.5 Release Notes
SWCC Command Console, V2.2.0
SWCC CLI Window, V2.5.0
HSagent, V2.5.0
HSG80shim, V2.2.0
HSG80ACS85 StorageWindow, V2.5.0
HSG80 StorageWindow, V2.1.0
HSG60 StorageWindow, V2.5.0
Introduction
5