Sonos Play 3 Product Manual page 3

The SONOS PLAY:3
The SONOS PLAY:3 is a wireless music system that lets you use any Sonos controller to control and enjoy all the music you
want all over your house (see "Sonos Controllers" on page 2 for more information).
• A 3 driver system delivers pure, clean, room-filling sound — perfect for bringing room filling music to a kitchen, bed-
room, office, or just about any room in your home.
• Its small size and multiple orientations make it perfect for fitting on bookshelves, nightstands, corners, or just about
anywhere.
• Works seamlessly with the complete range of Sonos products.
New to Sonos?
It takes just a few steps to get your Sonos system up and running— simply follow the setup instructions packaged with your
PLAY:3. Once you've got it set up, you can add additional Sonos components any time.
During setup, be sure to insert the power cord firmly into the back of the PLAY:3 until it is flush with the back of the unit.
Note: If you don't plan to listen to music in the room where your broadband router is
located, you can connect a SONOS BRIDGE™ (purchased separately) to your router to activate
the SonosNet™ wireless mesh network, and place the PLAY:3 wherever you want to listen to
music.
Adding to an existing Sonos system?
Sonos can be easily expanded room by room. If you are adding this PLAY:3 to an existing Sonos system, you can turn directly
to "Adding to an Existing Sonos System" on page 6.